3rd Gen Main Bearing Sizing HELP!
07-02-02, 03:18 AM
#1
Full Member
Thread Starter
Join Date: May 2002
Location: San Francisco
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
3rd Gen Main Bearing Sizing HELP!
I need to order new main bearings for my rebuild. Mazda has several different color coded sizes for the main bearings. When I took the old main bearings out, there werent any color codes on them. So I dont know where to start the measuring. How do I go about measuring them and ordering new ones?? Appreciate any help guys... thanks in advance.
07-03-02, 04:11 PM
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,805
Received 2,578 Likes
on
1,831 Posts
welcome to mazda!
mazda makes sized bearings for the fd, they have them over and under but i've never seen the original measurement, anywhere. your best bet is to reuse the originals (its better unless they are damaged), or failing that ask an engine builder, or you can take a shot in the dark and get the one in the middle
mike
mazda makes sized bearings for the fd, they have them over and under but i've never seen the original measurement, anywhere. your best bet is to reuse the originals (its better unless they are damaged), or failing that ask an engine builder, or you can take a shot in the dark and get the one in the middle
mike
04-15-07, 03:15 PM
#4
?????????????
Join Date: Sep 2003
Location: Greece
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Bringing this back from the dead:My rotor bearings and main bearings are fubar.Any ideas what to do?Mazdatrix has 3 different sizes for the rotor bearing and 10 sizes for the main bearing......
Stathis.
Stathis.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM
