13B treatments for better compression
#1
Full Member
Thread Starter
Join Date: Mar 2002
Location: Grand forks
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
13B treatments for better compression
i heard that you can add something to your engine that will harden the apex seals to give you better compression it was a three letter name if i remember correctly anyone know what im talking about?
thanx
thanx
#3
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't harden anything, just loosens up the springs if they are sticking. I have seen a guys T2 go from no compression, because it was flooded, back to good compression because we put ATF in there to lube stuff up. If your car is ever spinning with no compression after you flood it, you can put some in the chambers. I am sure oil would work as well if you don't want to use ATF for some reason.
#6
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Yah, what he said.
Leave the plugs out, squirt in about a cap full of ATF, and then crank the engine without fuel or spark. You can do this a few times to get a good coating.
Leave the plugs out, squirt in about a cap full of ATF, and then crank the engine without fuel or spark. You can do this a few times to get a good coating.
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM