13B RE Engine Swap
Thread Starter
Newbie
Joined: Mar 2007
Posts: 1
Likes: 0
From: Phoenix
13B RE Engine Swap
Hello
I am swaping a 13B RE TT 2 Rotar (cosmo) (1995) engine into a sandrail and need some help with the locating a wiring diagram for the engine and ecu. I am having trouble locating the coil power and trigger wires coming from the ecu (N390 18 8816). Any help would be greatly apperciated as this engine is new to me. Does this engine use a airflow sensor? Thanks?
I am swaping a 13B RE TT 2 Rotar (cosmo) (1995) engine into a sandrail and need some help with the locating a wiring diagram for the engine and ecu. I am having trouble locating the coil power and trigger wires coming from the ecu (N390 18 8816). Any help would be greatly apperciated as this engine is new to me. Does this engine use a airflow sensor? Thanks?
development
Joined: Aug 2002
Posts: 5,714
Likes: 7
From: Lafayette, LA
no a MAP sensor (manifold absolute pressure)
you might be able to use this as a ref.
look for the same color and you'll know that is the 12V source for the coils
the GND for the ECU needs to go thru an ignitor.
I also recommend converting to a single turbo...for simplicity.
you might be able to use this as a ref.
look for the same color and you'll know that is the 12V source for the coils
the GND for the ECU needs to go thru an ignitor.
I also recommend converting to a single turbo...for simplicity.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
cdn
2nd Generation Specific (1986-1992)
14
Sep 10, 2015 06:23 AM
Machupicchu
1st Generation Specific (1979-1985)
8
Aug 17, 2015 08:27 PM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM
cdn
2nd Generation Non-Technical and pictures
0
Aug 11, 2015 08:59 PM
