13B RE Engine Swap
 

Hello

I am swaping a 13B RE TT 2 Rotar (cosmo) (1995) engine into a sandrail and need some help with the locating a wiring diagram for the engine and ecu. I am having trouble locating the coil power and trigger wires coming from the ecu (N390 18 8816). Any help would be greatly apperciated as this engine is new to me. Does this engine use a airflow sensor? Thanks? :wallbash:

no a MAP sensor (manifold absolute pressure)

you might be able to use this as a ref.
http://i7.photobucket.com/albums/y28...p/0141614e.jpg
look for the same color and you'll know that is the 12V source for the coils

the GND for the ECU needs to go thru an ignitor.

I also recommend converting to a single turbo...for simplicity.