12A - Apex seal height
#4
Full Member
Thread Starter
Join Date: Oct 2001
Location: Prague , Czech republic
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
to PEEJAY
this is my first rebuilt, I try make street port. I don't care broke new parts (apex seal, side...)
I have not experience, only books and internet
this is my first rebuilt, I try make street port. I don't care broke new parts (apex seal, side...)
I have not experience, only books and internet
#6
Full Member
Thread Starter
Join Date: Oct 2001
Location: Prague , Czech republic
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I have complete rebuilt kit for 12A, but I wont use this new kit after assemble as touch it with functional older parts and if everithing will be OK, I will rebuit it with new parts.
I have very used rotor housing. I has had to take from inside rotor housing coat 0,8mm. And now add steel coat + very very dauncy layer of NITRID TITAN. It is technology from military company. If everithing will be OK, I will repair all my motors. I have only 1.gen. - 2 with licence tags, 4 for parts + 2 motors.
Thank you very much for future help.
Kyle Case
PS: http://www.kylecase.50megs.com/ - red RX now rebuilted. Will be green.
sorry for my poor english
I have very used rotor housing. I has had to take from inside rotor housing coat 0,8mm. And now add steel coat + very very dauncy layer of NITRID TITAN. It is technology from military company. If everithing will be OK, I will repair all my motors. I have only 1.gen. - 2 with licence tags, 4 for parts + 2 motors.
Thank you very much for future help.
Kyle Case
PS: http://www.kylecase.50megs.com/ - red RX now rebuilted. Will be green.
sorry for my poor english
#7
ACBron Motorsport
The only ******* here is the one that digs up posts from over a year ago and its not me and its not you, i think you can fiugre it out.
Sorry if i sound so pissed but this has been happening so much lately and is becoming a real headache for alot of forum mebers
Sorry if i sound so pissed but this has been happening so much lately and is becoming a real headache for alot of forum mebers
Last edited by Adsy01; 06-07-02 at 07:00 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post