RX7Club.com - Mazda RX7 Forum
0 2016/11/10 18:35:04
0 2016/11/10 18:44:47
0 2016/11/10 18:46:17
0 2016/11/10 18:56:04
0 2016/11/10 19:14:17
0 2016/11/10 19:14:49
0 2016/11/10 19:15:20
0 2016/11/10 19:16:01
0 2016/11/10 19:16:41
0 2016/11/10 19:17:10
1 2016/11/10 19:42:56
How the car used to look
How the car used to look
0 2016/11/12 20:40:37
0 2016/11/12 20:41:34
Stripped, made up a basic dashboard.
Stripped, made up a basic dashboard.
0 2016/11/12 20:42:12
Surge tank install, 2x 044s
Surge tank install, 2x 044s
0 2016/11/12 20:43:36
FC booster + master
FC booster + master
0 2016/11/12 20:44:33
Teaser
Teaser
0 2016/11/12 20:46:23
Turbo from my Rx7 i destroyed yesterday at the track haha.
Turbo from my Rx7 i destroyed yesterday at the track haha.
0 2016/11/12 20:47:55
Stripped, made a basic dashboard
Stripped, made a basic dashboard
0 2016/11/12 20:51:44
0 2016/11/12 20:55:10
Surge tank install, 2x 044s
Surge tank install, 2x 044s
0 2016/11/12 21:00:11
FC booster and master
FC booster and master
0 2016/11/12 21:01:01
0 2016/11/12 21:01:38
Teaser
Teaser
0 2016/11/12 21:02:05
Teaser
Teaser
0 2016/11/12 21:02:43
Turbo from my Rx7, bearings failed at the track yesterday haha.
Turbo from my Rx7, bearings failed at the track yesterday haha.
0 2016/11/12 21:03:40
Turbo from my Rx7, destroyed at track yesterday haha.
Turbo from my Rx7, destroyed at track yesterday haha.
0 2016/11/12 21:05:35
Practise housing, took hours to set up in the mill.
Practise housing, took hours to set up in the mill.
0 2016/11/14 20:23:08
0 2016/11/14 20:24:46
Turned out all right apart from having to use a sledge hammer to the insert pressed in. Some adjustment needed in the tolerances.
Turned out all right apart from having to use a sledge hammer to the insert pressed in. Some adjustment needed in the tolerances.
0 2016/11/14 20:25:19
0 2016/11/14 20:27:09
Holes cut in 4 brand new housings.
Holes cut in 4 brand new housings.
0 2016/11/14 20:27:32
Inserts started out looking like this
Inserts started out looking like this
0 2016/11/14 20:29:42
Then this
Then this
0 2016/11/14 20:30:30
Then this, ready to be pressed in. All the machining has been done with a maual mill and lathe with no digital readout, so takes bloody ages.
Then this, ready to be pressed in. All the machining has been done with a maual mill and lathe with no digital readout, so takes bloody ages.
0 2016/11/14 20:30:58
Inserts pressed in, heated the housings in the oven and froze the inserts using a 50/50 mix of methylated spirits and dry ice. Surface areas sand blasted for a good surface for the devcon to stick to.
Inserts pressed in, heated the housings in the oven and froze the inserts using a 50/50 mix of methylated spirits and dry ice. Surface areas sand blasted for a good surface for the devcon to stick to.
0 2016/11/14 20:33:16
0 2016/11/14 20:39:36
Finished product all polished up.
Finished product all polished up.
0 2016/11/14 20:39:59
0 2016/11/21 20:17:14
0 2016/11/21 20:17:38