RX7Club.com - Mazda RX7 Forum
Rebuilt differential with new seals. Axels, driveshaft and power plant in.
Rebuilt differential with new seals. Axels, driveshaft and power plant in.
0 2026/03/24 00:35:12
Some chrome and black nickel accents
Some chrome and black nickel accents
0 2026/03/24 00:35:16
0 2026/03/24 00:35:19
Power steering refurbished. New seals and tie rod ends.
Power steering refurbished. New seals and tie rod ends.
0 2026/03/24 00:55:25
Air conditioning and cooling system. Mishimoto radiator. I used the oem fan shroud with 2 new flex-a-lite 12” s type fans. All new hoses throughout
Air conditioning and cooling system. Mishimoto radiator. I used the oem fan shroud with 2 new flex-a-lite 12” s type fans. All new hoses throughout
0 2026/03/24 00:55:32
New wiper and coolant fluid reservoirs. New hoses and pump
New wiper and coolant fluid reservoirs. New hoses and pump
0 2026/03/24 00:55:39
Radium engineering fuel components. I’ve installed 2x injector dynamics 1050x and 2x 1700 injectors. A set of Msd d585 ls coils. Started laying out the engine harness and body harness aswell
Radium engineering fuel components. I’ve installed 2x injector dynamics 1050x and 2x 1700 injectors. A set of Msd d585 ls coils. Started laying out the engine harness and body harness aswell
0 2026/03/24 00:55:46
Perrin fuel pressure regulator. I used Performance World AN fittings and nylon wrapped stainless braided hose
Perrin fuel pressure regulator. I used Performance World AN fittings and nylon wrapped stainless braided hose
0 2026/03/24 00:55:51
Getting the new b&m hi flow oil coolers mocked up so mounted the front clip and fenders to avoid any routing complications.
Getting the new b&m hi flow oil coolers mocked up so mounted the front clip and fenders to avoid any routing complications.
0 2026/03/24 00:55:55
I’ve installed an Earl oil thermostat to accompany the dual oil coolers to keep the system operating at optimal temperatures. Performance World 10AN stainless braided hoses and fittings
I’ve installed an Earl oil thermostat to accompany the dual oil coolers to keep the system operating at optimal temperatures. Performance World 10AN stainless braided hoses and fittings
0 2026/03/24 00:56:01
0 2026/03/24 00:56:05
Mounts have been fabricated. Hoses have been built and test fitted.
Mounts have been fabricated. Hoses have been built and test fitted.
0 2026/03/24 01:19:57
Zero clearance issues.
Zero clearance issues.
0 2026/03/24 01:20:01
0 2026/03/24 01:20:04
0 2026/03/24 01:20:07
0 2026/03/24 01:20:10
Time to take it all apart and send all the made parts off to sand blasting and paint before final assembly.
Time to take it all apart and send all the made parts off to sand blasting and paint before final assembly.
0 2026/03/24 01:20:13
Next was exhaust. I’ve got the turbo (Borg Warner s300sx-e) and a proline exhaust manifold mounted it’s time to fab the down pipe and waste gate(precision turbo 46mm). 3” & 1.75”stainless with vibrant racing bends and pie cuts.
Next was exhaust. I’ve got the turbo (Borg Warner s300sx-e) and a proline exhaust manifold mounted it’s time to fab the down pipe and waste gate(precision turbo 46mm). 3” & 1.75”stainless with vibrant racing bends and pie cuts.
0 2026/05/09 05:42:01
0 2026/05/09 05:42:05
Vibrant v-band clamps
Vibrant v-band clamps
0 2026/05/09 05:42:10
I used a 5” magnaflow can muffler
I used a 5” magnaflow can muffler
0 2026/05/09 05:42:15
0 2026/05/09 05:42:20
0 2026/05/09 05:42:24
0 2026/05/09 05:42:29
0 2026/05/09 05:42:34
0 2026/05/09 05:42:39
0 2026/05/09 05:42:43
0 2026/05/09 05:42:48
0 2026/05/09 05:42:54