RX7Club.com - Mazda RX7 Forum
0 2026/05/09 05:42:54
0 2026/05/09 05:42:48
0 2026/05/09 05:42:43
0 2026/05/09 05:42:39
0 2026/05/09 05:42:34
0 2026/05/09 05:42:29
0 2026/05/09 05:42:24
0 2026/05/09 05:42:20
I used a 5” magnaflow can muffler
I used a 5” magnaflow can muffler
0 2026/05/09 05:42:15
Vibrant v-band clamps
Vibrant v-band clamps
0 2026/05/09 05:42:10
0 2026/05/09 05:42:05
Next was exhaust. I’ve got the turbo (Borg Warner s300sx-e) and a proline exhaust manifold mounted it’s time to fab the down pipe and waste gate(precision turbo 46mm). 3” & 1.75”stainless with vibrant racing bends and pie cuts.
Next was exhaust. I’ve got the turbo (Borg Warner s300sx-e) and a proline exhaust manifold mounted it’s time to fab the down pipe and waste gate(precision turbo 46mm). 3” & 1.75”stainless with vibrant racing bends and pie cuts.
0 2026/05/09 05:42:01
Time to take it all apart and send all the made parts off to sand blasting and paint before final assembly.
Time to take it all apart and send all the made parts off to sand blasting and paint before final assembly.
0 2026/03/24 01:20:13
0 2026/03/24 01:20:10
0 2026/03/24 01:20:07
0 2026/03/24 01:20:04
Zero clearance issues.
Zero clearance issues.
0 2026/03/24 01:20:01
Mounts have been fabricated. Hoses have been built and test fitted.
Mounts have been fabricated. Hoses have been built and test fitted.
0 2026/03/24 01:19:57
0 2026/03/24 00:56:05
I’ve installed an Earl oil thermostat to accompany the dual oil coolers to keep the system operating at optimal temperatures. Performance World 10AN stainless braided hoses and fittings
I’ve installed an Earl oil thermostat to accompany the dual oil coolers to keep the system operating at optimal temperatures. Performance World 10AN stainless braided hoses and fittings
0 2026/03/24 00:56:01
Getting the new b&m hi flow oil coolers mocked up so mounted the front clip and fenders to avoid any routing complications.
Getting the new b&m hi flow oil coolers mocked up so mounted the front clip and fenders to avoid any routing complications.
0 2026/03/24 00:55:55
Perrin fuel pressure regulator. I used Performance World AN fittings and nylon wrapped stainless braided hose
Perrin fuel pressure regulator. I used Performance World AN fittings and nylon wrapped stainless braided hose
0 2026/03/24 00:55:51
Radium engineering fuel components. I’ve installed 2x injector dynamics 1050x and 2x 1700 injectors. A set of Msd d585 ls coils. Started laying out the engine harness and body harness aswell
Radium engineering fuel components. I’ve installed 2x injector dynamics 1050x and 2x 1700 injectors. A set of Msd d585 ls coils. Started laying out the engine harness and body harness aswell
0 2026/03/24 00:55:46
New wiper and coolant fluid reservoirs. New hoses and pump
New wiper and coolant fluid reservoirs. New hoses and pump
0 2026/03/24 00:55:39
Air conditioning and cooling system. Mishimoto radiator. I used the oem fan shroud with 2 new flex-a-lite 12” s type fans. All new hoses throughout
Air conditioning and cooling system. Mishimoto radiator. I used the oem fan shroud with 2 new flex-a-lite 12” s type fans. All new hoses throughout
0 2026/03/24 00:55:32
Power steering refurbished. New seals and tie rod ends.
Power steering refurbished. New seals and tie rod ends.
0 2026/03/24 00:55:25
0 2026/03/24 00:35:19
Some chrome and black nickel accents
Some chrome and black nickel accents
0 2026/03/24 00:35:16
Rebuilt differential with new seals. Axels, driveshaft and power plant in.
Rebuilt differential with new seals. Axels, driveshaft and power plant in.
0 2026/03/24 00:35:12
Lookin good with some goodies mounted.
Lookin good with some goodies mounted.
0 2026/03/24 00:35:09
Took a lot less time than I thought it would. Luckily I had a hoist and engine jack to get the job done quick
Took a lot less time than I thought it would. Luckily I had a hoist and engine jack to get the job done quick
0 2026/03/24 00:35:06
0 2026/03/24 00:35:03
Fuel system. Radium engineering components throughout. 6AN fittings and lines. Perrin fuel pressure regulator
Fuel system. Radium engineering components throughout. 6AN fittings and lines. Perrin fuel pressure regulator
0 2026/03/21 10:56:28
Cooling system in. Mishimoto radiator. I kept the oem fan shroud but replaced the original 2 speed fans with 2 12” single speed flex-a-lite fans.
Cooling system in. Mishimoto radiator. I kept the oem fan shroud but replaced the original 2 speed fans with 2 12” single speed flex-a-lite fans.
0 2026/03/21 10:55:35
A/c system all components restored
A/c system all components restored
0 2026/03/21 10:54:45
All lines, brackets and fasteners have been refinished or replaced with new oem parts. New hoses and seals throughout
All lines, brackets and fasteners have been refinished or replaced with new oem parts. New hoses and seals throughout
0 2026/03/21 10:54:25
I replaced the factory master cylinder with a new 929 master. I did not use the original fluid reservoir with a clutch fluid feed so I’ve installed a willwood reservoir
I replaced the factory master cylinder with a new 929 master. I did not use the original fluid reservoir with a clutch fluid feed so I’ve installed a willwood reservoir
0 2026/03/21 10:53:55
Tool a little bit to creep the motor in. Luckily I had a hoist and engine jack. When I decided to do this I had no one to assist so installed it myself. Was a lot easier than I thought it would be
Tool a little bit to creep the motor in. Luckily I had a hoist and engine jack. When I decided to do this I had no one to assist so installed it myself. Was a lot easier than I thought it would be
0 2026/03/21 10:53:18
0 2026/03/21 10:52:56
All ready to go in
All ready to go in
0 2026/03/21 10:52:54