RX7Club.com - Mazda RX7 Forum
Finished mounting and plumbing my oil cooler and intercooler
Finished mounting and plumbing my oil cooler and intercooler
0 2016/05/08 18:50:37
0 2016/05/08 18:50:23
Here is another view of how i mounted the intercooler
Here is another view of how i mounted the intercooler
0 2016/05/01 17:24:06
Here is where i mounted the coils and fuse box
Here is where i mounted the coils and fuse box
0 2016/05/01 17:22:23
Here is how i mounted the intercooler. I liked rhe vmount set up better,bit im dying to drive my car ,and dont want to wait to get custom a/c hoses made
Here is how i mounted the intercooler. I liked rhe vmount set up better,bit im dying to drive my car ,and dont want to wait to get custom a/c hoses made
0 2016/05/01 17:19:54
This is what i came up with to solve the afm mounting problem. I ordered some silicone adapters to move it to in between the radiator and fender apron. This is just to show the basic idea. It will be lower than this
This is what i came up with to solve the afm mounting problem. I ordered some silicone adapters to move it to in between the radiator and fender apron. This is just to show the basic idea. It will be lower than this
0 2016/05/01 17:16:36
And here is a picture of the new regulator. While putting it back together, i noticed that some how one of the terminals on the intake temp sensor got broken off, so now I have to get another one
And here is a picture of the new regulator. While putting it back together, i noticed that some how one of the terminals on the intake temp sensor got broken off, so now I have to get another one
0 2016/03/20 06:38:23
How they look with the intake back on
How they look with the intake back on
0 2016/03/20 06:38:03
Here is a picture of the new rails installed
Here is a picture of the new rails installed
0 2016/03/20 06:36:55
Basically just inserted a large bolt into the larger hole, put on a hose clamp, cut off the head, put some panel bond on the inside of the hole until it was full, and put some on the outside, on the smaller hole i just panel bonded a push in body clip in. Total price, 0.00.
Basically just inserted a large bolt into the larger hole, put on a hose clamp, cut off the head, put some panel bond on the inside of the hole until it was full, and put some on the outside, on the smaller hole i just panel bonded a push in body clip in. Total price, 0.00.
0 2016/03/06 14:36:51
This is basically how it is going to fit, the rotary works kit that i was going to modify and use wouldn't work, i got all of the mounting brackets to work, but the radiator was way too big, i would have to cut a lot of my radiator support, and it still wouldn't work because it would hit the sway bar, this is actually the intercooler from the rotary works kit.if anyone has a fc that wants a vmount kit , let me know
This is basically how it is going to fit, the rotary works kit that i was going to modify and use wouldn't work, i got all of the mounting brackets to work, but the radiator was way too big, i would have to cut a lot of my radiator support, and it still wouldn't work because it would hit the sway bar, this is actually the intercooler from the rotary works kit.if anyone has a fc that wants a vmount kit , let me know
0 2016/02/28 07:55:41
0 2016/02/28 07:54:06
Heres where i got so far, only the top part of the radiator is bolted up, measured where the bottom has to be and how im going to mount it, and how to mount the intercooler and oil cooler
Heres where i got so far, only the top part of the radiator is bolted up, measured where the bottom has to be and how im going to mount it, and how to mount the intercooler and oil cooler
0 2016/02/26 17:38:59
Alao got a hid headlight kit, amd this relay harness
Alao got a hid headlight kit, amd this relay harness
0 2016/02/20 18:21:48
Also these stainless steel braided brake hoses came today
Also these stainless steel braided brake hoses came today
0 2016/02/20 18:20:43
Made a vent tube out of a piece of brake line and drilled a hole in the fuel pump cover and Welded it in.
Made a vent tube out of a piece of brake line and drilled a hole in the fuel pump cover and Welded it in.
0 2016/02/20 18:18:43
This is my 84 12a half bridgeport. Has a bright yellow hood, because when i ported and rebuilt the engine i was too stupid to bolt the hood back on.i figured that it sat lower than the nose of the car, that not toouch air would get under it, wrong, i hit 3rd gear and that damn thing flew about 25 feet into the air.it scared the shit out of me. I guess I'll never do that again
This is my 84 12a half bridgeport. Has a bright yellow hood, because when i ported and rebuilt the engine i was too stupid to bolt the hood back on.i figured that it sat lower than the nose of the car, that not toouch air would get under it, wrong, i hit 3rd gear and that damn thing flew about 25 feet into the air.it scared the shit out of me. I guess I'll never do that again
0 2016/02/15 07:13:19
Does anyone know what this is, it is leaking. It is about 4-6 inches above the fuel filter. Will i be alright just bypassing it.the send line goes from the tank, through the filter, then pump, and through this piece, and then to the line that runs to the front of the car, i was just going to remove it since I will be running a lot more pressure, and its already leaking. I just want to make sure what is is and does before I do that
Does anyone know what this is, it is leaking. It is about 4-6 inches above the fuel filter. Will i be alright just bypassing it.the send line goes from the tank, through the filter, then pump, and through this piece, and then to the line that runs to the front of the car, i was just going to remove it since I will be running a lot more pressure, and its already leaking. I just want to make sure what is is and does before I do that
0 2016/01/31 13:18:34
Here it is all cleaned up with a walbro fuel pump installed, and the fuel level sending unit removed. Im going to use the fb sending unit, since the car came with a brand new one in the storage bins
Here it is all cleaned up with a walbro fuel pump installed, and the fuel level sending unit removed. Im going to use the fb sending unit, since the car came with a brand new one in the storage bins
0 2016/01/15 16:58:47
This thing had about a half inch of crud on it when i first got it out of a car at the local u-pull-it, which was a few months ago, i cleaned all of the crap off of it when i got it, today when i got it out of my shed, it still stunk like bad gas, i wanted to gag.
This thing had about a half inch of crud on it when i first got it out of a car at the local u-pull-it, which was a few months ago, i cleaned all of the crap off of it when i got it, today when i got it out of my shed, it still stunk like bad gas, i wanted to gag.
0 2016/01/15 16:55:16
Here's a pic from the back, the third brake light is even perfectly centered with the taillight filler panel
Here's a pic from the back, the third brake light is even perfectly centered with the taillight filler panel
0 2016/01/15 13:32:02
Since it was black, i would see how it fit on the 7, here's how it looks from the side, its just taped down. It actually fits really well, the hatch clears it, as well as the power antenna
Since it was black, i would see how it fit on the 7, here's how it looks from the side, its just taped down. It actually fits really well, the hatch clears it, as well as the power antenna
0 2016/01/15 13:30:00
Heres how it looks from the bac, i can't figure out how to enlarge the pictures when you upload them, sorry for the far away shot
Heres how it looks from the bac, i can't figure out how to enlarge the pictures when you upload them, sorry for the far away shot
0 2016/01/15 13:25:44
This is just sitting on there , it actually fits really good, clears the hatch, and power antenna
This is just sitting on there , it actually fits really good, clears the hatch, and power antenna
0 2016/01/15 13:23:00
This just came today, the correct battery harness, now I can concentrate on the wiring
This just came today, the correct battery harness, now I can concentrate on the wiring
0 2016/01/15 12:43:29
Here's a pic of the whole new clutch hydraulic system installed
Here's a pic of the whole new clutch hydraulic system installed
0 2016/01/14 20:41:48
Heres a picture of how bad the clutch master cylinder was leaking, anybody know what I can use to clean the inside of the firewall where it was leaking
Heres a picture of how bad the clutch master cylinder was leaking, anybody know what I can use to clean the inside of the firewall where it was leaking
0 2016/01/14 20:39:50
And out on top of the turbo, and up and around the intake manifold and then bolted to the bracket, and then the throttle body. Can someone please tell me if this is how it is supposed to be routed.
And out on top of the turbo, and up and around the intake manifold and then bolted to the bracket, and then the throttle body. Can someone please tell me if this is how it is supposed to be routed.
0 2016/01/14 20:36:19
If you look closely you can see how i have the cable routed, it goes behind the alternator
If you look closely you can see how i have the cable routed, it goes behind the alternator
0 2016/01/14 20:34:31
That is just how they would be bolted up in the fender, hope this helps
That is just how they would be bolted up in the fender, hope this helps
0 2016/01/11 13:47:40
Also this came today, mtxl wideband
Also this came today, mtxl wideband
0 2016/01/08 19:27:40
I also started figuring out the vmount setup. I figured out how it gets mounted .all i have to do is make a few brackets, and it should bolt right up
I also started figuring out the vmount setup. I figured out how it gets mounted .all i have to do is make a few brackets, and it should bolt right up
0 2015/12/27 19:57:43
0 2015/12/27 19:57:03
Heres a picture of the driveshaft mounted
Heres a picture of the driveshaft mounted
0 2015/12/27 19:55:59
This shows the difference in where the bolt holesare situated, just had to ream both holes outward a little bit
This shows the difference in where the bolt holesare situated, just had to ream both holes outward a little bit
0 2015/12/01 09:58:35
Here it is installed, it was really easy to make
Here it is installed, it was really easy to make
0 2015/12/01 09:57:43
Here is a picture of the vmount setup
Here is a picture of the vmount setup
0 2015/11/30 17:19:43
I also put the headlights and the front nose panel back on so i can start mounting the vmount
I also put the headlights and the front nose panel back on so i can start mounting the vmount
0 2015/11/30 17:18:17
Here is the mount, just a simple square tube 3/4 inch thick, and i drilled holes in the crossmember to match the holes in the transmission, i just have to get 2 longer bolts to go through everything, then i can bolt up the driveshaft
Here is the mount, just a simple square tube 3/4 inch thick, and i drilled holes in the crossmember to match the holes in the transmission, i just have to get 2 longer bolts to go through everything, then i can bolt up the driveshaft
0 2015/11/30 17:15:04
I don't think it came out too bad for my first time using it, next up, the spare radio surround that I have
I don't think it came out too bad for my first time using it, next up, the spare radio surround that I have
0 2015/11/09 17:50:52