FDNewbie Imports FDNewbie Imports: OEM, aftermarket, and rare JDM parts specialists. We ARE the forum JDM Junkies!

Recaro type RZ carbon-kevlar oem seats

Old 11-08-08, 11:15 AM
  #1  
Rotary and GT-R addicted
5 Year Member
Thread Starter
 
RotorManiac's Avatar
 
Join Date: Jun 2004
Location: Thessaloniki, Greece
Posts: 25
Likes: 0
Recieved 0 Likes on 0 Posts
Recaro type RZ carbon-kevlar oem seats

Ramy,
I'm desperately looking for those seats, I tried contacting you via email a month ago, but you didn't respond. are they available? I know it is very hard to find them.
I also posted on the cf dash kit group buy. if I can get them both it'd be great...

actually, if I can order from you, I'll throw in some other parts that I've seen on your website and I definately want them. I have the money waiting, if you talk to me, we can do bussiness.
I'm talking about a 4-5K order and I'm not fooling around. for shipping please bare in mind that I leave in europe.

Regards
Sergio
RotorManiac is offline  
Old 11-09-08, 02:03 PM
  #2  
Sponsor
RX7Club Vendor
iTrader: (9)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,197
Likes: 0
Recieved 0 Likes on 0 Posts
Hey Sergio,

Replied to your email

Thanks,
~Ramy
FDNewbie Imports
FDNewbie is offline  
Old 11-10-08, 06:27 PM
  #3  
Rotary and GT-R addicted
5 Year Member
Thread Starter
 
RotorManiac's Avatar
 
Join Date: Jun 2004
Location: Thessaloniki, Greece
Posts: 25
Likes: 0
Recieved 0 Likes on 0 Posts
thank you for replying!
do these seats come with new rails or do they use the stock ones?
well, I have a couple more questions, I'd better send you an email
RotorManiac is offline  
Old 11-11-08, 07:03 AM
  #4  
Sponsor
RX7Club Vendor
iTrader: (9)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,197
Likes: 0
Recieved 0 Likes on 0 Posts
Yea I saw your email real quickly this morning before running to work; I'll email ya back prob. later tonight.

~Ramy
FDNewbie is offline  
Old 02-17-09, 02:17 PM
  #5  
Lives on the Forum
iTrader: (80)
 
Supernaut's Avatar
 
Join Date: Jun 2008
Location: Los Angeles CA
Posts: 5,831
Likes: 0
Recieved 1 Like on 1 Post
Can you answer his question about the rails? Im curious myself. I've been told that the rails don't sit in the stock position.
Supernaut is offline  
Old 02-18-09, 09:57 AM
  #6  
The Anti-Prius
15 Year Member
iTrader: (9)
 
Sled Driver's Avatar
 
Join Date: Feb 2001
Location: Federal Way, WA
Posts: 1,107
Likes: 0
Recieved 0 Likes on 0 Posts
Originally Posted by Supernaut View Post
Can you answer his question about the rails? Im curious myself. I've been told that the rails don't sit in the stock position.
I have a pair of these that I sourced from Ramy...............

The RZ seat rails have a built in tilt feature. Since the seats have a fixed seat back this allows you to adjust the seat back angle. Direct bolt in with seatbelt buckle that slides with the seat like the 93-95 seat.

The rails are a low profile, giving you a little more headroom. You could probably use washers, duct tape & lag bolts to adapt the 93-95 seat rails to the RZ seats, but they are going to be spaced higher. Even if the your 93-95 seat rails can be made to fit the RZ seats, I wouldn't use them.

Normally the RZ & Spirit R seats will include the rails.
If not, you should get a major discount. The seat rails, by themselves, are a bitch to find.
Sled Driver is offline  
Old 02-18-09, 05:42 PM
  #7  
Eats, Sleeps, Dreams Rotary
10 Year Member
 
7racer's Avatar
 
Join Date: Apr 2001
Location: Dallas, Texas
Posts: 3,737
Likes: 0
Recieved 0 Likes on 0 Posts
I only have the tilt on the drivers and not on the passenger. It looks like someone got an aftermarket rail to drop the seat even further (for the RHD guys).

and I wish I would have gotten a discount!
7racer is offline  
Old 02-20-09, 11:07 PM
  #8  
Sponsor
RX7Club Vendor
iTrader: (9)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,197
Likes: 0
Recieved 0 Likes on 0 Posts
As Sled Driver said, the rails are bolt on, and come w/ the seats. They are EXTREMELY difficult to source, and are quite expensive to buy new (on the order of well over a grand). That's why I have a disclaimer about the seats that my priority is to source and sell to you guys the best condition SEATS. The rails, however, are a "you get what you get" kinda deal. I can't promise you'll get the tilt function on either or both seats (it was an option, not a standard function). I even have a seat here and there w/o any rails, which can be used w/ the OEM rails, as is mentioned too. So bottom line is, I do my best to get the best SEATS, cuz trust me, that's hard enough to find as it is. If we wanna staggard seats w/ and w/o rails + the tilt function, the price would go up, cuz it would take MUCH longer to find, AND may involve buying multiple seats to piece together a set of seats w/ matching rails...

~Ramy
FDNewbie is offline  
Old 03-29-10, 05:17 AM
  #9  
Junior Member
 
Join Date: Jul 2005
Location: Sunshine Coast QLD
Posts: 24
Recieved 0 Likes on 0 Posts
Ramy, you have mail!

I am very interested in some seats...

Cheers
Trent
rotor4me is offline  
Old 03-30-10, 01:26 AM
  #10  
Sponsor
RX7Club Vendor
iTrader: (9)
 
FDNewbie's Avatar
 
Join Date: Jul 2003
Location: Tampa, FL
Posts: 13,197
Likes: 0
Recieved 0 Likes on 0 Posts
Trent, just emailed you back.

Thanks,
~Ramy
FDNewbie is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: