French FD
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Location: France
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
French FD
Hi
My name is Lionel, i live in France close to Paris
I have a RX7 FD3S 1993
I bought it in December 2004 to replace a Honda Integra TypeR.
My old car :
My new car :
(click on the pictures to increase, RX pictures are old photographs)
- S RACING Aluminum Shift ****
- PIVOT Security starter (push start)
- URAS Side clear turn lens kit
- EFINI Front and Rear black badges
- BLITZ Turbo timer Fat DCIII
- KN air filter
- PIVOT volt stabilizer (gift)
- GLASSTINT
- FALKEN FK451
- ALPINE Cda9833r
- FOCAL Speakers
For the moment it is practically of origin and i am replacing all the worn parts (hoses, plugs, filters, clutch,...) and then I will begin my project :
- HKS Downpipe
- High flow catalyser (I did not choose the model yet)
- Exhaust muffler single tip (I did not choose the model yet)
- Aluminum Air Separator tank
- FLUIDYNE Race radiator
- GREDDY TypeR Blow Off Valve
- EFINI Turbo Piping Upgrade
- RP Competition Fuel Pump
- MAGNECOR R100 Plug Wire Set
- Intercooler (I did not choose the model yet)
- RACING BEAT Air Inlet Duct Kit
- A-Pillar Dual Mount with DEFI gauges (boost, oil temp)
- BONEZ Street Comp Clutch (or exedy) with RP Braided Stainless Steel Clutch Hose.
- TEIN Suspension kit (type RA)
- Braided stainless steel brake lines
- AP RACING brake kit
- JDM Headlamps - black housing
- 18" GRAM LIGHT 57Fpro (with Bridgestone S03)
- C-WEST Fresh Air Headlight Cover
- Stainless Steel Scuff Plates
- Rear wing
(http://www.dragonperformance.co.uk/p...90a077c416.jpg
racing beat Type II ?)
If I still have money :
- KS AUTO KD-I typeII (aero kit)
PS : Sorry for my average english language :wave
My name is Lionel, i live in France close to Paris
I have a RX7 FD3S 1993
I bought it in December 2004 to replace a Honda Integra TypeR.
My old car :
My new car :
(click on the pictures to increase, RX pictures are old photographs)
- S RACING Aluminum Shift ****
- PIVOT Security starter (push start)
- URAS Side clear turn lens kit
- EFINI Front and Rear black badges
- BLITZ Turbo timer Fat DCIII
- KN air filter
- PIVOT volt stabilizer (gift)
- GLASSTINT
- FALKEN FK451
- ALPINE Cda9833r
- FOCAL Speakers
For the moment it is practically of origin and i am replacing all the worn parts (hoses, plugs, filters, clutch,...) and then I will begin my project :
- HKS Downpipe
- High flow catalyser (I did not choose the model yet)
- Exhaust muffler single tip (I did not choose the model yet)
- Aluminum Air Separator tank
- FLUIDYNE Race radiator
- GREDDY TypeR Blow Off Valve
- EFINI Turbo Piping Upgrade
- RP Competition Fuel Pump
- MAGNECOR R100 Plug Wire Set
- Intercooler (I did not choose the model yet)
- RACING BEAT Air Inlet Duct Kit
- A-Pillar Dual Mount with DEFI gauges (boost, oil temp)
- BONEZ Street Comp Clutch (or exedy) with RP Braided Stainless Steel Clutch Hose.
- TEIN Suspension kit (type RA)
- Braided stainless steel brake lines
- AP RACING brake kit
- JDM Headlamps - black housing
- 18" GRAM LIGHT 57Fpro (with Bridgestone S03)
- C-WEST Fresh Air Headlight Cover
- Stainless Steel Scuff Plates
- Rear wing
(http://www.dragonperformance.co.uk/p...90a077c416.jpg
racing beat Type II ?)
If I still have money :
- KS AUTO KD-I typeII (aero kit)
PS : Sorry for my average english language :wave
Last edited by JapanSpirit; 07-24-05 at 09:46 PM.
#5
Junior Member
Thread Starter
Join Date: Dec 2004
Location: France
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Merci
I bought the car in france but one of the former owners had a house in Belgium.
I believe that 26 RX7 FD sold in france officially (between 1992 and 1995)
Thanks
This one ?
many French Rx7 users are gathered on this forum : http://rx7.free.fr/forum/
Originally Posted by Speedworks
welcome Lionel, looking good.
Did you perhaps buy the car in Belgium?
Neal
Did you perhaps buy the car in Belgium?
Neal
I believe that 26 RX7 FD sold in france officially (between 1992 and 1995)
Originally Posted by skim41
Hi looks good.
I can supply you the KD burnout bodykit when needed.
Regards
Rogier
I can supply you the KD burnout bodykit when needed.
Regards
Rogier
Thanks
This one ?
many French Rx7 users are gathered on this forum : http://rx7.free.fr/forum/
Trending Topics
#9
Rotary Freak
Join Date: Dec 2002
Location: Slovenia, Europe
Posts: 2,522
Likes: 0
Received 0 Likes
on
0 Posts
Welcome.
What about the ECU upgrade. With those mods you will need it.
And a boost controller also.
You should have then a similar setup to mine
Good choice on the cars though.
I currently own both - RX7 and Integra TypeR
What about the ECU upgrade. With those mods you will need it.
And a boost controller also.
You should have then a similar setup to mine
Good choice on the cars though.
I currently own both - RX7 and Integra TypeR
#13
Full Member
Hello skim41,
tell more about the Bodykit. I´m intrestet in that thing.How much it cost and what is all in this kit. Whats about with hoods(vented) here in Europe?
Thx Ray
tell more about the Bodykit. I´m intrestet in that thing.How much it cost and what is all in this kit. Whats about with hoods(vented) here in Europe?
Thx Ray
#14
Junior Member
Thread Starter
Join Date: Dec 2004
Location: France
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by supracharged
Nice car! Really are there rx7 fd in france? and what is their prices?
Good luck ith your mods.
Good luck ith your mods.
Hi
It was sold between 92 and 95 only.
There is approximately about thirty rx7 Fd3s in France by counting the imports.
One finds them (used) between 14000 et 18000 euros on average (More if mileage is very low).
@+
#15
Originally Posted by JapanSpirit
Hi
It was sold between 92 and 95 only.
There is approximately about thirty rx7 Fd3s in France by counting the imports.
One finds them (used) between 14000 et 18000 euros on average (More if mileage is very low).
@+
It was sold between 92 and 95 only.
There is approximately about thirty rx7 Fd3s in France by counting the imports.
One finds them (used) between 14000 et 18000 euros on average (More if mileage is very low).
@+