Standalones and wideband prices...
Thread Starter
Full Member
Joined: May 2005
Posts: 57
Likes: 0
From: Garden Grove,Southern California
Standalones and wideband prices...
so how much are some common brand
stand alones and widebands??
im looking for standalone and wideband for my s4 t2
i also need to know how much the products go for...
name me good ones that are in the low priced range
thx folks!
stand alones and widebands??
im looking for standalone and wideband for my s4 t2
i also need to know how much the products go for...
name me good ones that are in the low priced range
thx folks!
Widebands- it depens they range on different prices, different options, gauges, etc.
But look for :Innovate
AEM
Plx
NGK
Roughly= $200-$500
Standalone- haltech
Microtec
Megasquirt
Roughly= $900-up
Except for megasquirt, comes out cheaper but has to be made unless you buy the ZMS (check groupbuy).
I hope that helps you somewat.
But look for :Innovate
AEM
Plx
NGK
Roughly= $200-$500
Standalone- haltech
Microtec
Megasquirt
Roughly= $900-up
Except for megasquirt, comes out cheaper but has to be made unless you buy the ZMS (check groupbuy).
I hope that helps you somewat.
Thread Starter
Full Member
Joined: May 2005
Posts: 57
Likes: 0
From: Garden Grove,Southern California
yeah thx
so if i want to tune my car with wideband
i heard i need a seprate air fuel ratio gauge unless that
specific wideband already comes with one...
any recommendations to air fuel ratio gauges that are accurate?
so if i want to tune my car with wideband
i heard i need a seprate air fuel ratio gauge unless that
specific wideband already comes with one...
any recommendations to air fuel ratio gauges that are accurate?
well some of them do. i got the innovate kit. lc1 w/ xd16 gauge comboe (really nice set)
there is also a plx wideband groupbuy going on now i believe
https://www.rx7club.com/showthread.p...0&page=1&pp=15
also with some standalones u dont need a gauge, u can just run wideband to standalone and when u tune it shows u the wideband AFR readings there, but i prefer the gauge cuz im not always gonna have my laptop hooked up.
try doing a few searches and im sure u will find alot more info than i have gave u here. good luck!
there is also a plx wideband groupbuy going on now i believe
https://www.rx7club.com/showthread.p...0&page=1&pp=15
also with some standalones u dont need a gauge, u can just run wideband to standalone and when u tune it shows u the wideband AFR readings there, but i prefer the gauge cuz im not always gonna have my laptop hooked up.
try doing a few searches and im sure u will find alot more info than i have gave u here. good luck!
Thread
Thread Starter
Forum
Replies
Last Post
SRTx781
3rd Generation Specific (1993-2002)
6
Dec 19, 2015 07:30 PM






