Just wondering what you guys think is better for a good reliable street car .
13b cosmo
Percision turbo PT67
tial 44 wastegate
obx 50mm bov
fmic
800cc primarys
1200cc secondarys

 

Both are good, and each probably has advantages (I'm not an expert on them). Whats important is which your tuner is more comfortable with.

 

mirotec choice of re-amemiya

 

did you end up buying the Fb thats pictured in your avatar?

 

They each have their pluses and minus, depending on what your end goals are might help you dictate which ECU to go for.

 

Go with Haltech, it has more support since it is based in the US. Just to upgrade to a 3 bar map sensor, I had to spend $40 shipping it to AU, $325 for the upgrade, and $55 for shipping back. As far as performance, they are about equal I believe.

 

I only have experiences with the MicroTech, so I don't have much to say about the Haltech.

I've had no issues with mine so far, install was fairly straightforward, and the hand controller is pretty handy for adjustments on the fly. I'm not sure if the Haltech has a handset like MicroTech does.

The only downside I see to the MT would be servicibility and lack of flexibility(I can't use it on the 13B-REW). Prices are fairly decent for new units, I got my LT8-s for $800 shipped new from a member on these boards.

What this all boils down to is who you want to tune the motor. If you're doing the tune, pick whichever one fits you. Do some more research, and learn everything about each system; MicroTech and Haltech aren't the only options out there, btw. If you're not doing the tune, pick one that is most familiar to tuners in your area.

 

[QUOTE=MaczPayne;7919119]I only have experiences with the MicroTech, so I don't have much to say about the Haltech.

I've had no issues with mine so far, install was fairly straightforward, QUOTE]


+1

 

I have a micro atm and an changing to haltech with my cosmo block.

Id go a E8 haltech (which I have) + wideband, cant wait to get it all up and running..
Also micro cant run the OMP the haltech can

 

so then works better with an S4 mechanical pump?

 

Cosmo block is electric OMP.
So unless he wants to pre-mix or do other tricky things the Micro wont run it. The haltech will.