Autronic
#1
Cheese
Thread Starter
Join Date: May 2001
Location: Australia
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Autronic
I have purchased a SM2 for my RX7 s5. The sm2 was bought 2nd hand from a ex v8 supercar. It is running 2.06 software. I would like to take advantage of autotune, closed loop & traction control. I wish to install it myself, however have it tuned by a professional. I understand I will need a 4-wire oxysensor, wiring loom, and airtemp sensor. What else do I need in order to get her running?
Also would it be possible to get *.cal file that i could use as a starter? I'm running std 550cc inj primary and rochestor 1000cc inj secondary. It still has standard ign and some mild intake porting. It has produced 317hp from twin TD05 18G turbos (18psi).
Riceracing, Rxeng anyone?
Cheers
B
Also would it be possible to get *.cal file that i could use as a starter? I'm running std 550cc inj primary and rochestor 1000cc inj secondary. It still has standard ign and some mild intake porting. It has produced 317hp from twin TD05 18G turbos (18psi).
Riceracing, Rxeng anyone?
Cheers
B
Last edited by ORX705; 03-19-03 at 06:44 PM.
#2
Cheese
Thread Starter
Join Date: May 2001
Location: Australia
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
i recieved this email from Ray Hall:
If anyone is going to know it's Ray. However, I'm sure that Riceracing is running closed loop and autotune. How did he go about it?
The 2.06 chip is a special chip made for GroupA V8 race cars only. All ECU's sold to the general public are not available with the 2.06 chip. The 1.92, 1.93 and 1.94 are the latest Autotune chips for the SM2. The 2.06 does not have ignition split that you will require on the rotary. The only chip with this feature is the 1.49 and it does not have Autoune or CLC.
Ray Hall.
Ray Hall.
Thread
Thread Starter
Forum
Replies
Last Post