Engine Management Forum Use this area for discussing Haltech, Wolf 3D, Power FC, AEM and any other aftermarket ECU upgrades. Help/Questions/Tuning

91 RX7 Auto Trans Problem

Thread Tools
 
Search this Thread
 
Old Aug 25, 2019 | 06:37 PM
  #1  
camaroracer's Avatar
Thread Starter
Newbie
 
Joined: Aug 2019
Posts: 2
Likes: 0
From: Alabama
91 RX7 Auto Trans Problem

Research found another with exact problem back in 2005 but replays or followup.
1991 RX7 the Problem is:

1) All Gears are able to be accessed with the Shift Lever, and car goes into all Gears (P, R, N, D, S, L)

2) Shift Indicator on Dash only shows "N", even when car is in Park.

3) While running and driving, the car starts off fine while depressing the accelerator for a second or so........then shifts into 3rd gear. Downshifts to first when it should but next shift is to 3rd. The Hold light function with the switch but has no affect. Has been working fine parked it in the garage and the next morning problem occurred

Any thoughts or suggestions would be appreciated..
Reply
Old Sep 5, 2019 | 10:08 PM
  #2  
camaroracer's Avatar
Thread Starter
Newbie
 
Joined: Aug 2019
Posts: 2
Likes: 0
From: Alabama
Question

Originally Posted by camaroracer
Research found another with exact problem back in 2005 but replays or followup.
1991 RX7 the Problem is:

1) All Gears are able to be accessed with the Shift Lever, and car goes into all Gears (P, R, N, D, S, L)

2) Shift Indicator on Dash only shows "N", even when car is in Park.

3) While running and driving, the car starts off fine while depressing the accelerator for a second or so........then shifts into 3rd gear. Downshifts to first when it should but next shift is to 3rd. The Hold light function with the switch but has no affect. Has been working fine parked it in the garage and the next morning problem occurred

Any thoughts or suggestions would be appreciated..
Must be someone in RX7 world with a suggestion or two.
Reply
Old Sep 6, 2019 | 02:30 PM
  #3  
mR.dnA's Avatar
Full Member
Tenured Member: 20 Years
Liked
iTrader: (1)
 
Joined: Sep 2005
Posts: 107
Likes: 10
From: Los Angeles
Based on what you're describing, I would check the inhibitor switch.

Section H-1 of the wiring diagram available here has the pinout information.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nismogtr
New Member RX-7 Technical
7
Nov 7, 2017 06:07 PM
Seamoan
2nd Generation Specific (1986-1992)
7
May 21, 2010 01:35 AM
kandyman
2nd Generation Specific (1986-1992)
14
Sep 27, 2007 11:37 AM
NDkid23
2nd Generation Specific (1986-1992)
6
Jan 28, 2007 10:35 PM




All times are GMT -5. The time now is 11:25 PM.