89 engine ecu harness in 88 body
#1
Passenger
Posts: n/a
89 engine ecu harness in 88 body
i have complete engine harness from a 89 and the ecu .when i removed it from the parts car the far right plug in the ecu feeds from the dash harness, so i clipped a few inches from where it enters the dash harness. Question, can i splice that into the 88 dash harness and be good to go or do i need to pull complete dash harness from the 89 also to run the 89 motor? this will be a track car only if it matters.
#2
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
My friend did it. He put a 90 motor and harness in an 88. I helped him out with it. We used the shop manuals for each car to figure out the wiring. If you don't have them you can download them from http://www.fc3s.org . You'll want to look at the fuel and emissions sections.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM