RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Drifting (https://www.rx7club.com/drifting-226/)
-   -   Suspension set ups on your drifter? (https://www.rx7club.com/drifting-226/suspension-set-ups-your-drifter-738254/)

Petrol Burner 04-28-08 04:39 PM


Originally Posted by DRFT_HRD (Post 8140237)
off of 3000 w. you should check out driftutah.com or slcrotary.com if your not already a member. i run ogden canyon alot when my car runs. as soon as i get my new motor in you should come theres a few of us out this way so we could get a decent touge group going.

Sweet. I'm already with SLC rotary and frequent driftutah, but not registered there yet. When you do run , let me know. It sounds like allota fun.

SICRX7 04-29-08 05:31 AM

yeah but i dont want to spend big dollars on fifff want just like a hilux diff or sumthin but i just want to no what is involed in doing a hilux diff convertion

DRFT_HRD 04-29-08 06:52 AM


Originally Posted by Petrol Burner (Post 8140848)
Sweet. I'm already with SLC rotary and frequent driftutah, but not registered there yet. When you do run , let me know. It sounds like allota fun.

fo sho lol.

Ranzo 05-01-08 09:39 PM

Ohlins coilover 9k/8k with Pan Speed Caster/Camber adjuster on front
Secret Element Tie Rod spacers
Rmagic Front and Rear Strut tower braces
Border Camber adjust rod and Rmagic camber links



http://img167.imageshack.us/img167/4900/dscf1177or8.jpg

http://img297.imageshack.us/img297/6910/0003dn2.jpg

http://img522.imageshack.us/img522/2392/dscf1250me4.jpg

http://img160.imageshack.us/img160/6...ae604e1is4.jpg

too many 7's 05-05-08 12:14 AM

kyb agx's with Eibach pro springs.
stock s4 gxl lsd
stock sways.
it ain't much but it gets the job done!

T FC3 H 05-07-08 11:20 AM

where is everyone ordering the Supernow products?

TheDarkRacer 05-07-08 06:47 PM

^^^^
https://www.rx7club.com/potential-advertisers-223/superangle-tie-rods-fc-fd-724090/

I think u can still order them.

i need new tie rod ends....
~TDR

DRFT_HRD 05-07-08 10:54 PM

www.RHDjapan.com

mario1386 05-07-08 11:10 PM

my setup on my n/a rx7 fc 87

kei-office coilovers
solid diff bushing and subframe bushings
solid dtss bushings
stock sways
turbo 2 rear end

Digi7ech 05-14-08 12:58 PM

I'm currently running
Infini front upper strut bar
S4 NA LSD rearend w/ 200k on it(blown out)
Tokico Blues with stock springs

I drift this setup just fine. My clutch is bad so I'm stuck doing 2nd gear power over but it rips through fine. I love the Tokico blues. great genreal use strut.

As of Friday I will have
Cusco front lower strut bar
S4 TII lsd rearend
MMR solid rear diff mount
MMR delrin rear control arm bushings
MMR delrin front control arm bushings
MMR delrin DTSS replacement bushings

and maybe Hockey puck tranny mounts since I didn't order those yet and may have to fab them.

Then next week I will have Ksport Kontrol Pro's but won't have them installed in time for my next event. :(

turboefini88 05-22-08 09:55 PM

My setup:

Stance GR+ Front rebound set about half way, rears at full hard. Springs are set 2 turns of the perch past not being able to turn them by hand.
Secret Element Super Angle inner Tie rods. Stock outters for now.
Complete suspension techniques master bushing kit.
Mazdatrix DTSS eliminators.

I probably have about 1400 in my suspension right now. When next year rolls aroung, Ill be about 4 grand into suspension.

Rotary Noob 05-25-08 02:40 PM


Originally Posted by SICRX7 (Post 8138769)
hi im building a rx7 s2 with a rb25det engine with rb30 bottom end, stage 2 cams, adjustable cam gears, arp head studs, cometic head gasket, t70 turbo, high mount turbo manifold, after market inlet manifold, 100mm throttle body, r31 skyline 5 speed gearbox, fuel cell bosh 044 fuel pump external waste gate, adjustable fuel pressure regulator, front mount intercooler 4 inch exhaust and haltec computer plus alot more goodies but now im wondering what diff to put in it to handle a shit load of power but not a 9 inch cos to expensive does anyone no what diff to put in it that wont cost a fortune and easy to install and what suspension should i use???

Currie enterprises Ford 9" housing, thats my suggestion. Youve already bought so much in parts, not to mention how long it has taken to put it all together...do you really want to break axles or ring gears when you use it the first time?

Besides, the ford 9" has all kinds of ring and pinion available...easy to change ratio.

Digi7ech 06-02-08 02:11 PM


Originally Posted by Digi7ech (Post 8190428)
I'm currently running
Infini front upper strut bar
S4 NA LSD rearend w/ 200k on it(blown out)
Tokico Blues with stock springs

I drift this setup just fine. My clutch is bad so I'm stuck doing 2nd gear power over but it rips through fine. I love the Tokico blues. great genreal use strut.

As of Friday I will have
Cusco front lower strut bar
S4 TII lsd rearend
MMR solid rear diff mount
MMR delrin rear control arm bushings
MMR delrin front control arm bushings
MMR delrin DTSS replacement bushings

and maybe Hockey puck tranny mounts since I didn't order those yet and may have to fab them.

Then next week I will have Ksport Kontrol Pro's but won't have them installed in time for my next event. :(

Got the Ksports on and WOW. Sooooo much easier to throw the car around and hold angles without snap over steer.

I would have been waaaay better if I had these on for the drift event. Although the tokico and eibachs in the rear did a good job.

Zenki FC3S 06-06-08 04:48 PM

ksport slide kontroll 10/13 springs, welded diff, manual rack, rt615's up front and seat time...

RE TurboII 07-16-08 11:57 PM

http://i11.photobucket.com/albums/a1...urboII/091.jpg

ilia 07-17-08 03:52 PM

Stance and a welded diff.

ALLslowNOshow 07-17-08 09:42 PM

Stance GR+ Pro
DTSS eliminators
Manual rack

Right now I'm just waiting for whoever decides to get into the modded spindle market, so I can buy a set one day.

ElitetunerzRx7 12-22-08 01:19 AM

KYB shocks w/ 8 way adjustable dampning on rear 4 way on front.
wrapped with Tein Lowering springs.
Welded diff.

just did it today but it feels amazing. unfortunately theres snow in gay old oregon where i live but ill keep an update on the thread after the event on the 3rd and let you know how much better they are.

drftwerks 12-22-08 01:44 AM

cuts sprizzings.

jujubing 12-22-08 12:07 PM

hell yea cut springs and blown shocks...w a welded diff......its all about weight transfer!!!!

FlikstRR 03-05-09 08:56 PM

HSD Drift coilovers
DTSS eliminators
Uras tie rods
Mazdatrix steering angle kit
Mazdaspeed 2way

K!NCH 03-07-09 04:21 PM

Stance GR+ Coilovers
Mazdatrix DTSS Eliminators
TC Sportline front and Rear Strut bars.

leftcoastdrifter 03-07-09 10:02 PM

Megan street coilovers w/ camber plates
Racin Beat dtss eliminators
T2 sway bar
GXL diff
S5 depowerd rack coming soon

Project86 03-07-09 10:13 PM


Originally Posted by afro88 (Post 8004724)
DO NOT GET TOKICO BLUES!!!!

I had them on my old car and..... they suck to say the least. Save a bit more and get quality shocks or coilovers.

The FC right now is sitting on Tein (I hate Tein) drift spec I think (I didnt buy em). I have delrin DTSS elims and rear lca bushings but they havent been installed yet.

why did you hate them? I have them with eibach pro kit and mine are awesome.

dkwasherexd 03-08-09 04:09 AM

tein Ha
welded s4 na diff, modded t2 driveshaft to fit na diff
all stock original bushings[300,000 plus miles]FTL !
7mm Partshopmax tierod spacers with stock tierods !
no rear sway bar

yeah..

i need new diff mounts, it started to clunk again when I clutch kick..... I wonder how it will feel once i get dtss eliminators and my knuckles modded..


All times are GMT -5. The time now is 02:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands