Suspension set ups on your drifter?
So im gonna get this thread started. Post what set up your using/what you have used/planning on using and opinions on it.
Me: I have stock shocks with eibach spings. But i have some ground control sitting next to me(hehe) and tryn to get some aftermarket shocks. Prob tokico blues for now. :icon_tup: Please keep drift bashing out of here. Thanks! :) ~TDR |
Kei Office coilovers, Racing beat front and rear swaybars, Adj endlinks, dtss eliminators and a rear camber rod.
|
PoweredbyMAX Coilovers
Supernow Rear Solid Subframe Mounts Supernow Lateral Links (Toe) Supernow Rear Camber Adjusters RacingBeat DTSS Upcoming Parts Supernow Single Rear Camber Adjuster Cusco 2-way Supernow Super Angle Steering Kit |
stock
stock stock stock stock exhaust tips =D hahaha |
|
tein ha's
dtss eliminators |
Ksport control pro coilovers
Corksport rear strut brace Random front strut brace racing beat endlink energy suspension poly bushings AWR Solid subframe mounts KAAZ 2 way LSD. |
DO NOT GET TOKICO BLUES!!!!
I had them on my old car and..... they suck to say the least. Save a bit more and get quality shocks or coilovers. The FC right now is sitting on Tein (I hate Tein) drift spec I think (I didnt buy em). I have delrin DTSS elims and rear lca bushings but they havent been installed yet. |
lol too late... But i got some tokico blues on my honda(DD) and they arnt that bad... but they arnt gonna get beatin on... Ill buy some KYB AGX one day... just gotta get something to sit on the car.. Turned out all 4 of my shocks were blown.
|
Tokico blues are good for what they are made for, daily drivers that will never see a track or spirited driving. Lifetime warrenty I believe.
|
yea im gonna be driving the accord hard when i start driving again...so ill end up blowing those and steppn my game up lol.
But I doubt that they are doing too much right now.. i got some GC coilovers with 450lbs front and 365 in the rear.... |
Stance GR+ 9k/7k Coilovers
DTSS Eliminators Kaaz 1.5way that's about it |
http://i28.photobucket.com/albums/c2.../Rearcombo.jpg
http://i28.photobucket.com/albums/c2...frontcombo.jpg http://i28.photobucket.com/albums/c2...tbarhole-1.jpg thats all im prob gonna have untill i can get it running and some seat time in. |
tein super drift,st supensions sway bars,cusco front and rear strut bars,dtss elimators.
soon kaaz 2 way lsd |
My Setup
4 Attachment(s)
Ground control weld on coilover kit
Front: Eibach 700/400/250= 7in,400lb,2.5in springs Koni 86series front strut ReSpeed Camber plates Ground Control front Sway bar Rear: Tokico Blues, Eibach springs 250lb, 2 deadcoils cut MOSER Engineering -se axles SPW TYPE4 steering wheel Future: Kaaz 1.5 LSD Re-Speed R&P Steering kit -SE 13b 6port with Weber 48 dcoe Other mods: https://www.rx7club.com/showthread.p...ghlight=flares |
my current setup
Cusco Front and Rear Coilovers Cusco Front Strut Brace Cusco Rear Strut Brace Mazdaspeed underbody brace Supernow Steering Rack Spacers Supernow Tie Rod Ends Shortened Tie Rods, etc Supernow Solid Rear Diff Mounts Supernow Rear Camber Link Supernow Solid Dtss Eliminators Supernow Castor and Camber Tops 326 Power Steering Knuckles (modified by haruguchi) |
Super now FTW just orderd a set of thier tie rods.
|
^^ never knew they made tie-rods..
i have some JIC FC tie-rods.. but supernow spacers are heaps better. |
Cusco Comp-S
1.5 way |
Originally Posted by Wezzmo
(Post 8122499)
^^ never knew they made tie-rods..
i have some JIC FC tie-rods.. but supernow spacers are heaps better. |
I'm sporting KYB AGX's and racingbeat springs.
Hey DRFT_HRD, whereabouts in Syracuse? Im in the Ogden area. |
Dual shock controller
Rockstar energy drinks Couch LOL |
hi im building a rx7 s2 with a rb25det engine with rb30 bottom end, stage 2 cams, adjustable cam gears, arp head studs, cometic head gasket, t70 turbo, high mount turbo manifold, after market inlet manifold, 100mm throttle body, r31 skyline 5 speed gearbox, fuel cell bosh 044 fuel pump external waste gate, adjustable fuel pressure regulator, front mount intercooler 4 inch exhaust and haltec computer plus alot more goodies but now im wondering what diff to put in it to handle a shit load of power but not a 9 inch cos to expensive does anyone no what diff to put in it that wont cost a fortune and easy to install and what suspension should i use???
|
Originally Posted by Petrol Burner
(Post 8129678)
I'm sporting KYB AGX's and racingbeat springs.
Hey DRFT_HRD, whereabouts in Syracuse? Im in the Ogden area. |
Originally Posted by SICRX7
(Post 8138769)
hi im building a rx7 s2 with a rb25det engine with rb30 bottom end, stage 2 cams, adjustable cam gears, arp head studs, cometic head gasket, t70 turbo, high mount turbo manifold, after market inlet manifold, 100mm throttle body, r31 skyline 5 speed gearbox, fuel cell bosh 044 fuel pump external waste gate, adjustable fuel pressure regulator, front mount intercooler 4 inch exhaust and haltec computer plus alot more goodies but now im wondering what diff to put in it to handle a shit load of power but not a 9 inch cos to expensive does anyone no what diff to put in it that wont cost a fortune and easy to install and what suspension should i use???
i dont know whats availalbe for FB's, but i remember reading up on people doing the ford rear end w/ multilink suspension. or you could do the ford rear end and try to get an aftermarket LSD for that. worst case scenario just weld it. im sure you could buy a few spare differentials for pretty cheap too, just in case you bust one. |
All times are GMT -5. The time now is 11:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands