summit HEART and stuff
04-24-11, 09:36 PM
#178
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
This was the rear section of exhaust i had make at my buddies shop. I had this done b4 the event.
Last edited by Summit HEART; 04-24-11 at 09:42 PM.
05-06-11, 08:08 PM
#186
Senior Member
iTrader: (2)
Join Date: Mar 2006
Location: gloucester
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Are you bottoming out at that ride height. I had a huge problem when I first started drifting my fd. The rear inner fender clearance is almost none at that ride height. The car would go into a complete spin cycle after spring compression.
05-06-11, 10:45 PM
#187
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
My rears rub outer fender under compression but it just turns into tires into that shiny liquid rubber that gets everywhere, I don't really notice when sliding. My rear damping is set all the way to hard with alittle rear rake. I think it keeps the rear planted since FDs squat so much.
05-07-11, 07:51 AM
#188
ziptied.com hates you
Join Date: May 2008
Location: Himeji, JPN / Orange County, Ca
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
hmm interesting. I barely rub my sidewalls too; instant tireshine. hahaha.
but rear damping all the way hard? I guess FD's are really different; I'm
usually around 2 clicks up from all the way soft.
but rear damping all the way hard? I guess FD's are really different; I'm
usually around 2 clicks up from all the way soft.
05-10-11, 11:57 AM
#190
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Ok so at 2a.m. I find out that my friend Bryce is down to Dyno some cars. Me being alittle intoxicated and down for a free dyno sesh I wake up early and drive to a high school automotive class that he helps with. This was all super last minute and kinda half assed but was fun non the less.
Bryce bent the exhaust cone into an oval so it would fit over my tips and strapped the car down
Excited to see how much actual power the car was making, I guessed 350 crank and when ever some one would ask at events i would tell them around 350ish so we'll see. The car had never been dynoed only street tuned.
http://www.youtube.com/watch?v=ZAYwggiNZH8&sns=fb
321 WHP, 235 TQ @ 13psi apexi RX6 "low boost" Mustang Dyno
We had to stop after 3 pulls the car was disturbing the classes in other parts of the building do to the noise plus I had to get going to work. I realize that the power is low for an FD but im very happy with this result. The car is on a conservative tune that is a few years old now. At this power it is more than enuf to slide and for me to get use to a new chassis. I want to get better at driving not better at building motors so as of now the boost is staying at 13lbs to keep reliability. Plus if its not broke don't fix it.
Bryce bent the exhaust cone into an oval so it would fit over my tips and strapped the car down
Excited to see how much actual power the car was making, I guessed 350 crank and when ever some one would ask at events i would tell them around 350ish so we'll see. The car had never been dynoed only street tuned.
http://www.youtube.com/watch?v=ZAYwggiNZH8&sns=fb
321 WHP, 235 TQ @ 13psi apexi RX6 "low boost" Mustang Dyno
We had to stop after 3 pulls the car was disturbing the classes in other parts of the building do to the noise plus I had to get going to work. I realize that the power is low for an FD but im very happy with this result. The car is on a conservative tune that is a few years old now. At this power it is more than enuf to slide and for me to get use to a new chassis. I want to get better at driving not better at building motors so as of now the boost is staying at 13lbs to keep reliability. Plus if its not broke don't fix it.
05-18-11, 11:36 AM
#194
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
VIDEO from MDU rd 1
@ 1.02-1.07 you can see my **** stach
@ 2.01 alittle wheel molestation
http://vimeo.com/23562679
@ 1.02-1.07 you can see my **** stach
@ 2.01 alittle wheel molestation
http://vimeo.com/23562679
Last edited by Summit HEART; 05-18-11 at 11:42 AM. Reason: i suck
05-18-11, 11:54 AM
#196
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
MDU RD 2 VIDEO
http://www.facebook.com/video/video....88126&comments
let me know if this works i cant hot link
http://www.facebook.com/video/video....88126&comments
let me know if this works i cant hot link
05-18-11, 12:18 PM
#197
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
cold weather/ rain = super shitty tandem , **** i need a CAGE!
Me @.24 thats all the footage i have so far
http://www.youtube.com/watch?v=iifhi...embedded#at=29
Me @.24 thats all the footage i have so far
http://www.youtube.com/watch?v=iifhi...embedded#at=29
05-19-11, 04:27 AM
#199
Senior Member
iTrader: (2)
Join Date: Oct 2006
Location: Kalamazoo MI
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
I was gunna try and make mdu round 2. But my engine is bone stock, I don't think if be able to stay in it throughout the bank. I'd end up making love to that wall..
Anyway, sweet car man! Looks good.
Anyway, sweet car man! Looks good.
05-20-11, 12:10 AM
#200
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
OMGDRIFT write up of RD2 http://omgdrift.com/?p=5498