summit HEART and stuff
#153
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Like $400 shipped but I also got their inner tie rods that are thicker, longer and have a built-in spacer. The tie rods should help with the pulling effect that some guys with knuckles experience.
#155
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Finally pulled my CUSCO MZ diff apart and adjusted the cam shaft and plates so now the diff is %100 locking and set to 2way. When I opened it up it was set to %80 lock and 1.5way.
I used these links to help me with the diff
http://www.motoiq.com/magazine_artic...ferential.aspx
http://www.cusco.co.jp/en/parts_prod...rs_typemz.html
https://docs.google.com/viewer?a=v&p...4VaU7USA&pli=1
Thanks allrotor93 for the good price on the diff
#156
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Here's my battery box, I've slowly acquired stickers from events, online and people i've meet while drifting.
One I had signed by Keiichi Tsuchiya at D1 Chicago
And now the box recessed into the passenger side bin. Also I put a battery quick disconnect "not a kill switch" so when the car sits for long periods the battery is lest likely to drain and I don't have to pull the cable off.
One I had signed by Keiichi Tsuchiya at D1 Chicago
And now the box recessed into the passenger side bin. Also I put a battery quick disconnect "not a kill switch" so when the car sits for long periods the battery is lest likely to drain and I don't have to pull the cable off.
#160
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
How was he not smashing into the lower control arm looks like he's still using stock? also it looks like he's using stock tie rods? If both of these things are true i just got a **** load more confident on FD angle.
Right now im using the closer hole on my PBM knuckles because was afraid of to much angle while using the stock stuff and it smashing into ****. I haven't driven my car yet with knuckles installed i still need to do an eyeball aliment b4 i get my leget one.
Right now im using the closer hole on my PBM knuckles because was afraid of to much angle while using the stock stuff and it smashing into ****. I haven't driven my car yet with knuckles installed i still need to do an eyeball aliment b4 i get my leget one.
#162
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
alittle sneak peak of funess from http://mdudrift.com/ RD 1
I have to sort through pictures/videos and pick out the good ones intill then enjoy
I have to sort through pictures/videos and pick out the good ones intill then enjoy
#175
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Here are a few links for videos, I cant figure out how to post them let me know if they work.
http://www.facebook.com/video/video....&subj=57104991
http://www.facebook.com/video/video....&subj=57104991
http://www.facebook.com/video/video....&subj=57104991
http://www.facebook.com/video/video....&subj=57104991
http://www.facebook.com/video/video....&subj=57104991
http://www.facebook.com/video/video....&subj=57104991