The OFFICIAL drift setup thread
#1577
Full Member
Join Date: Jun 2011
Location: Pittsburgh, PA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
What's the easiest way to get the stock rear diff bushings out? I have a Harbor Freight Press but can't figure out how to set it up to get those bushings out... I was able to knock the subframe bushings out with a hammer and socket but the diff bushings were giving me a hard time. I may have to cut them out...
#1578
Full Member
Join Date: Sep 2012
Location: Tacoma, Wa
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
What's the easiest way to get the stock rear diff bushings out? I have a Harbor Freight Press but can't figure out how to set it up to get those bushings out... I was able to knock the subframe bushings out with a hammer and socket but the diff bushings were giving me a hard time. I may have to cut them out...
#1580
Full Member
Join Date: Jun 2011
Location: Pittsburgh, PA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Wow that fire lol! I have compressor in my garage so I may try to get my hands on an air hammer first... thanks for the advice. Will post some pics of my new rear end setup when its all said and done.
#1583
Senior Member
Join Date: Dec 2011
Location: Sacramento, Ca
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Question to people running extended ball joints. I have a set extended but it seems like my tie rod end does not want to extend out enough. Im guessing it might be from the length I extended it, but what are peoples solutions to something like this?
#1585
Grabbin My Wankel
iTrader: (2)
Join Date: May 2004
Location: Yonkers N.Y.
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Mazdatrix Bump Steer kit
Cart Price Check Part:R-BUMPSTEER-KIT
Cart Price Check Part:R-BUMPSTEER-KIT
#1589
Senior Member
Join Date: Nov 2011
Location: Oklahoma City, OK
Posts: 418
Likes: 0
Received 0 Likes
on
0 Posts
I extended one of mine 2" just for ***** and gigs and ended up with -10* camber. I have a feeling those are going to be a little long, 1.5" put me at -6.3* and it feels perfect.
#1597
Inner Tie Rods 91 rx7
So in the drifting world im just about to buy some modded knuckles... i know eventually im going to be bending many many inner tie rods and i was wondering if anyone has found a stronger solution to the stock ones. I have been searching the web with no luck but oem looking stuff.
Thanks all
Thanks all
#1598
RX7-Factory
iTrader: (8)
So in the drifting world im just about to buy some modded knuckles... i know eventually im going to be bending many many inner tie rods and i was wondering if anyone has found a stronger solution to the stock ones. I have been searching the web with no luck but oem looking stuff.
Thanks all
Thanks all