Drifting Discuss Drifting and drifting techniques here.

Hydraulic Handbrake Nissan Z32 Dual Caliper Kit for Rx7 FC

Old Feb 25, 2016 | 05:14 PM
  #1  
stukellymotorsports's Avatar
Thread Starter
Registered User
 
Joined: Jan 2016
Posts: 97
Likes: 0
From: Indiana
Hydraulic Handbrake Nissan Z32 Dual Caliper Kit for Rx7 FC

After not being satisfied with the performance of having a set of stock FC rear calipers as a standalone hand brake set, I have decided to incorporate the caliper that many 240sx owners love because of its dual piston "motorcycle like" design.

With a set of z32 calipers, and any FC vented rotor, this kit will bolt up and give you a great responding hydraulic handbrake.

We tested this kit on our t2 missile car with the cheapest hydraulic handbrake on ebay, and the results were awesome.

Checkout that testing video here -


This kit comes with all mounting hardware, but you must source your own z32 calipers, hydraulic lines, and e-brake.

$179.99 plus shipping.


Send me a PM if you are interested.





Reply
Old May 20, 2016 | 08:45 PM
  #2  
stukellymotorsports's Avatar
Thread Starter
Registered User
 
Joined: Jan 2016
Posts: 97
Likes: 0
From: Indiana
In 4 years of driving the Rx7 FC chassis, I have never had an E-Brake work as well as it does now.
I have gone through countless cable setups, ten's of bottles of brake fluid bleeding stock calipers, dual caliper setups with stock calipers all to come up short and my build lacking (arguably) one of the most important pieces to drifting
After installing my own Dual Z32 Caliper Kit on my FC, I no longer envy those with well working hand brakes because I too have my own.
I have never quite experienced a 100% working E-Brake like I have now and I can't wait to use this new level of control for close tandem action!
IF you own an FC and have a lackluster E-Brake don't let it affect your tandems! UPGRADE NOW and get our Dual Z32 Caliper KIT!
Reply
Old May 22, 2016 | 10:23 PM
  #3  
driftfcbuckey's Avatar
RX7-Factory
Tenured Member 15 Years
iTrader: (8)
 
Joined: Jan 2008
Posts: 2,676
Likes: 18
From: Vegas
Originally Posted by stukellymotorsports
In 4 years of driving the Rx7 FC chassis, I have never had an E-Brake work as well as it does now.
I have gone through countless cable setups, ten's of bottles of brake fluid bleeding stock calipers, dual caliper setups with stock calipers all to come up short and my build lacking (arguably) one of the most important pieces to drifting
After installing my own Dual Z32 Caliper Kit on my FC, I no longer envy those with well working hand brakes because I too have my own.
I have never quite experienced a 100% working E-Brake like I have now and I can't wait to use this new level of control for close tandem action!
IF you own an FC and have a lackluster E-Brake don't let it affect your tandems! UPGRADE NOW and get our Dual Z32 Caliper KIT!
Didn't realize the drifting section was a means to advertise and sell product 🤔
Reply
Old May 23, 2016 | 03:06 PM
  #4  
lastphaseofthis's Avatar
My job is to blow **** up
Tenured Member 20 Years
iTrader: (8)
 
Joined: Jan 2005
Posts: 2,903
Likes: 5
From: palmyra Indiana
didn't realize drifting ***** had money.
Reply
Old Jul 3, 2016 | 09:13 AM
  #5  
stukellymotorsports's Avatar
Thread Starter
Registered User
 
Joined: Jan 2016
Posts: 97
Likes: 0
From: Indiana
July 4th Weekend special only 20% Off !

PM me for info.
Reply
Old Dec 5, 2016 | 05:27 PM
  #6  
stukellymotorsports's Avatar
Thread Starter
Registered User
 
Joined: Jan 2016
Posts: 97
Likes: 0
From: Indiana
These are on sale for the holiday season for $154.99!
Stu Kelly Motorsports
Reply
Old Feb 4, 2017 | 09:18 AM
  #7  
myusername's Avatar
Junior Member
 
Joined: Nov 2016
Posts: 11
Likes: 0
From: Ohio
Just curious if you know how a z33 rear caliper would compare to the z32 as far as fitment goes? I know the z32 caliper is probably superior as far as performance, but I have a set of z33 calipers sitting here and if they would fit with these brackets I would like to use them
Reply
Old Feb 4, 2017 | 09:23 AM
  #8  
stukellymotorsports's Avatar
Thread Starter
Registered User
 
Joined: Jan 2016
Posts: 97
Likes: 0
From: Indiana
Originally Posted by myusername
Just curious if you know how a z33 rear caliper would compare to the z32 as far as fitment goes? I know the z32 caliper is probably superior as far as performance, but I have a set of z33 calipers sitting here and if they would fit with these brackets I would like to use them
Can you measure the distance between the mounting hole centers on the rear calipers?
Reply
Old Feb 4, 2017 | 09:31 AM
  #9  
myusername's Avatar
Junior Member
 
Joined: Nov 2016
Posts: 11
Likes: 0
From: Ohio
Wow, I didn't expect a response that quick. I should be able to get that for you today hopefully if I can bear the cold and make it to the shop. Also planning on ordering your manual-power steering TR adapter and rack spacers
Reply
Old Mar 26, 2017 | 07:54 PM
  #10  
leftcoastdrifter's Avatar
Dustin Becktold
Tenured Member 05 Years
iTrader: (17)
 
Joined: Oct 2007
Posts: 674
Likes: 0
From: Salem Or
I don't have a problem with my hydro but this would add so eye candy to it.
Reply
Old May 29, 2017 | 01:03 PM
  #11  
stukellymotorsports's Avatar
Thread Starter
Registered User
 
Joined: Jan 2016
Posts: 97
Likes: 0
From: Indiana
These are still for sale for $152.99
Reply
Old Jul 2, 2017 | 11:30 PM
  #12  
ReckLe55x7's Avatar
Junior Member
 
Joined: Jun 2017
Posts: 10
Likes: 0
From: Cali
oooo i know what im doing next!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
are-ex7
3rd Generation Specific (1993-2002)
4
Jan 31, 2016 09:17 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:52 PM.