front wheel fitment - maximising fitment, lock potential and getting laid
06-10-12, 05:34 AM
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: tasmania, australia
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
front wheel fitment - maximising fitment, lock potential and getting laid
as the question asks, what are you running up front to steer with, get heaps of lock and still look good
i was wondering about running 17 x 9 +12 but not sure how they will go with standard guards
thanks again for your help!
i was wondering about running 17 x 9 +12 but not sure how they will go with standard guards
thanks again for your help!
06-10-12, 09:41 AM
#2
My car is green
iTrader: (7)
Join Date: Oct 2003
Location: Reading PA
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
i run 17x8.5 +17's up front, but add a 30mm spacer so theyre at -13. I have knuckles, drop outter tie rod ends and rack spacers...and without the 30mm spacers, my car rubbed all over after the steering mods. I have 25mm over fenders and run about 2.8* of neg camber...
for the getting laid.... use 5pt harnesses..make sure to strap all 5 pts of the bitch in the pssenger seat and make sure to look her in the eyes and say "this is the most important one" as you strap the crotch harness... after said run, proceed to find someones enclosed trailer and blast bitches till your groups grids up again... works every time.
for the getting laid.... use 5pt harnesses..make sure to strap all 5 pts of the bitch in the pssenger seat and make sure to look her in the eyes and say "this is the most important one" as you strap the crotch harness... after said run, proceed to find someones enclosed trailer and blast bitches till your groups grids up again... works every time.
06-10-12, 07:49 PM
#4
Junior Member
Thread Starter
Join Date: Jan 2012
Location: tasmania, australia
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
So in effect your saying 17x9 +12 won't fit with standard front guards
And that I need a 5 pt harness on passenger seat to increase how much I get laid
And that I need a 5 pt harness on passenger seat to increase how much I get laid
06-11-12, 03:02 PM
#7
ziptied.com hates you
Join Date: May 2008
Location: Himeji, JPN / Orange County, Ca
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
06-11-12, 03:11 PM
#8
If you want to getCRAZY with angle you're going to need to notch the framerail in front of the wheels.
I'm running 17x9 -20, steering spacers, custom knuckles, and a sectioned framerail.
I'm running 17x9 -20, steering spacers, custom knuckles, and a sectioned framerail.
06-12-12, 12:10 PM
#9
Senior Member
iTrader: (5)
Join Date: Jan 2010
Location: Ft. Wayne
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
for the getting laid.... use 5pt harnesses..make sure to strap all 5 pts of the bitch in the pssenger seat and make sure to look her in the eyes and say "this is the most important one" as you strap the crotch harness... after said run, proceed to find someones enclosed trailer and blast bitches till your groups grids up again... works every time.
06-13-12, 10:28 PM
#11
Junior Member
Thread Starter
Join Date: Jan 2012
Location: tasmania, australia
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
i just wopped on some 18 x 9 +6, fits with just under 3 deg camber and a bit of love to the guard
225/40/18 sits better on a 9 than an 8
but still i need to extend LCA/Balljoint to clear a few things on the inside
225/40/18 sits better on a 9 than an 8
but still i need to extend LCA/Balljoint to clear a few things on the inside
08-31-12, 08:15 PM
#12
Junior Member
Join Date: Jul 2012
Location: CT
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
09-01-12, 12:26 AM
#13
Banned. I got OWNED!!!
iTrader: (2)
Join Date: Dec 2011
Location: Albuquerque
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
I'm running 17x9 +10 with 215/40's, 1.5in extended ball joints/rack spacers/knuckles with 30mm fenders and lotsa neg camber. I found the getting laid part started working better when I finally put a passenger seat in myself.
Thread
Thread Starter
Forum
Replies
Last Post
