drift wheel and tire setup
#1
drift wheel and tire setup
We have a official wheel fitment thread but its not drift specific. most cars on that thread are running +30 offsets. I think we need a drift only wheel and tire thread containing:
1. wide wheels and low offsets
2. size tires your running ?
3. rolled fenders or over fenders and their size?
4. approximately how low ?
5. spacers?
6. type of coilovers or springs
7 most importantly pics
1. wide wheels and low offsets
2. size tires your running ?
3. rolled fenders or over fenders and their size?
4. approximately how low ?
5. spacers?
6. type of coilovers or springs
7 most importantly pics
#2
Mother****ing Wow
Join Date: Jul 2008
Location: NJ
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
15x8 +6 all around
10mm spacer in front
50mm spacer in rear
Fender flares about 50mm all around
205/50/15 Azenis RT615 in front
205/50/15 cheapos in the rear
Stance Al+Pro
my car is way too low... like stupid low.
10mm spacer in front
50mm spacer in rear
Fender flares about 50mm all around
205/50/15 Azenis RT615 in front
205/50/15 cheapos in the rear
Stance Al+Pro
my car is way too low... like stupid low.
#7
Mother****ing Wow
Join Date: Jul 2008
Location: NJ
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
^^^ no you retards, it just does not have aero... as a matter of fact if it did it would not be drivable.
My front tires (205/50/15)rub the top of the wheel well, so basically it cannot go any lower without a tub.
I'm certain my car is lower than all of yours... you have aero so yours look lower... fucktards
stop bitching and post up your set-ups...
My front tires (205/50/15)rub the top of the wheel well, so basically it cannot go any lower without a tub.
I'm certain my car is lower than all of yours... you have aero so yours look lower... fucktards
stop bitching and post up your set-ups...
Trending Topics
#10
I
iTrader: (3)
Join Date: Nov 2007
Location: at home
Posts: 1,063
Likes: 0
Received 0 Likes
on
0 Posts
my not so cool wheels. 17x7 +40 offset with 25mm spacers all around
not cool r32 gtst wheels 16x6.5 +38 25mm front 50mm rear
fenders are rolled but no pull. Should be getting some cooler wheels soon
not cool r32 gtst wheels 16x6.5 +38 25mm front 50mm rear
fenders are rolled but no pull. Should be getting some cooler wheels soon
#11
Full Member
iTrader: (1)
Join Date: Oct 2008
Location: sarasota
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
stance coilovers
17x9 - 4ish? with maxxis 235-40-17 on the front
17x10 negative something offset with 255-40-17 rear
18x 10 -3 with 255-35-18 rear
+25mm front fenders, +30mm rears
yeah
17x9 - 4ish? with maxxis 235-40-17 on the front
17x10 negative something offset with 255-40-17 rear
18x 10 -3 with 255-35-18 rear
+25mm front fenders, +30mm rears
yeah
#15
Garage Life
iTrader: (8)
17x10 -28 215/40/17 front maxed camber[I need sum 17x9s]
18x9.5 -15 245/40/18 rear -2.9 camber I want zero camber, but I need the individual camber links to do that. Maybe I should add a 10mm slip on spacer..
Some times I run 255/40/18 in the rear.. depends on the track..
18x9.5 -15 245/40/18 rear -2.9 camber I want zero camber, but I need the individual camber links to do that. Maybe I should add a 10mm slip on spacer..
Some times I run 255/40/18 in the rear.. depends on the track..
#16
Mother****ing Wow
Join Date: Jul 2008
Location: NJ
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
17x10 -28 215/40/17 front maxed camber[I need sum 17x9s]
18x9.5 -15 245/40/18 rear -2.9 camber I want zero camber, but I need the individual camber links to do that. Maybe I should add a 10mm slip on spacer..
Some times I run 255/40/18 in the rear.. depends on the track..
18x9.5 -15 245/40/18 rear -2.9 camber I want zero camber, but I need the individual camber links to do that. Maybe I should add a 10mm slip on spacer..
Some times I run 255/40/18 in the rear.. depends on the track..