About Us ChipsMotorsports
#1
About Us ChipsMotorsports
Chips Motorsports is located in southeast Michigan and we provide service for all make and model performance vehicles. We specialize in custom rotary engine powered performance vehicles. We have over 20+ years of experience with stock daily drivers to turbocharged track and show cars. We also provide extensive fabrication and machining capabilities which enable us to accommodate any request. Our experience and knowledge allows us to provide you, the customer, quality products and professional services.
Services provided
Custom Fabrication
Engine Balancing
Engine Porting
Engine Rebuilds Installation
Repair Services
Oil System Modifications
Plate Lapping Re-Nitriding
Rotor Machining
Prototype CNC design and machining
Prototype Aluminum Casting
Custom Forged Wheels in house wheel design.
Our 3 piece forged wheels are available for the universal sizes 18, 19, 20, 22 and up to 15 inches wide . If a special size is required, we can customize it upon request.
Wheels are made to order, 4 to 6 weeks wait time.
Model # for the wheels below CM127
Super Concave Option
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Some models are available to chose from on our website.
http://www.chipsmotorsports.com/forged-wheels
Some examples of the work wee do.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
This is just a quick idea what wee do here at chipsmotorsports.
Do subscribe, i will be updating details with pics of customer work happening here at the shop
For more info and services
Contact
www.Chipsmotorsports.com
248-250-0967
Chip U
Services provided
Custom Fabrication
Engine Balancing
Engine Porting
Engine Rebuilds Installation
Repair Services
Oil System Modifications
Plate Lapping Re-Nitriding
Rotor Machining
Prototype CNC design and machining
Prototype Aluminum Casting
Custom Forged Wheels in house wheel design.
Our 3 piece forged wheels are available for the universal sizes 18, 19, 20, 22 and up to 15 inches wide . If a special size is required, we can customize it upon request.
Wheels are made to order, 4 to 6 weeks wait time.
Model # for the wheels below CM127
Super Concave Option
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Some models are available to chose from on our website.
http://www.chipsmotorsports.com/forged-wheels
Some examples of the work wee do.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
This is just a quick idea what wee do here at chipsmotorsports.
Do subscribe, i will be updating details with pics of customer work happening here at the shop
For more info and services
Contact
www.Chipsmotorsports.com
248-250-0967
Chip U
Last edited by ChipsMotorsports; 03-30-11 at 09:57 AM.
#3
Wee will be building/rebuilding this 3 rotor for Damian track car.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Some Mods that it will receiving here at Chips
Full rebuild
Lapped and re-nitrated irons housings
Porting
3mm wire EDM cut rotors
Clearanced rotors
Dry sump setup, individual feeds for main bearings etc...
Will be updating with pics as i go on this build.
Thanks
Last edited by ChipsMotorsports; 04-04-11 at 06:55 AM.
Trending Topics
#15
Thank you
#17
The king of the highway!
iTrader: (2)
Join Date: May 2004
Location: Home of the 305 Boyz(miami)
Posts: 2,988
Likes: 0
Received 0 Likes
on
0 Posts
i got a request for you... i have a front mount with the radiator sitting behind.. as well as a front bumper (take a look at the ab flug front bumper) with a massive hole for air flow... is it possible to have a custom air duct that will go over the intercooler and hit the radiator to allow the radiator to breath.... kinda like an arch over the intercooler and hitting the radiator...
#18
i got a request for you... i have a front mount with the radiator sitting behind.. as well as a front bumper (take a look at the ab flug front bumper) with a massive hole for air flow... is it possible to have a custom air duct that will go over the intercooler and hit the radiator to allow the radiator to breath.... kinda like an arch over the intercooler and hitting the radiator...
Thanks
#19
Goodfalla Engine Complete
iTrader: (28)
i got a request for you... i have a front mount with the radiator sitting behind.. as well as a front bumper (take a look at the ab flug front bumper) with a massive hole for air flow... is it possible to have a custom air duct that will go over the intercooler and hit the radiator to allow the radiator to breath.... kinda like an arch over the intercooler and hitting the radiator...
#21