12.15@114.5 with AFC Neo
#1
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
12.15@114.5 with AFC Neo
Hey guys , I got my personal best of 12.15@114.5mph 1.82 60ft tonight at Sparta running 16psi . Im pretty excited about this my goal is 11.99 i was soooo close, i spun the tires in 4th gear, so if i can get one more time this season i think i should be able to hit 11.99.
the best part is this is with a chipped n374 AFC neo,stock AFM, and a pretty restrictive exhaust, so full standalone with launch control would be friggen awesome
Also i should add i daily drive this car 6 months outta the year
my set up is
87 TII chassis
Jdm S5 TII engine
6x 550cc injectors (2prim 4sec)
Garrett a/r .60 hybrid turbo running 16psi(bnr style)
old school greddy FMIC set up
2.5" dp to 3" pipe to 2.5" muffler ( LOL work in progress)
OS Giken twin disk clutch
solid aluminum engine and tranny mounts
apexi filter with 3" TID
KS chipped n374 ECU and AFC neo
worn bf goodrich drag radials 225/45R17's 19psi (heavy bastards)
the best part is this is with a chipped n374 AFC neo,stock AFM, and a pretty restrictive exhaust, so full standalone with launch control would be friggen awesome
Also i should add i daily drive this car 6 months outta the year
my set up is
87 TII chassis
Jdm S5 TII engine
6x 550cc injectors (2prim 4sec)
Garrett a/r .60 hybrid turbo running 16psi(bnr style)
old school greddy FMIC set up
2.5" dp to 3" pipe to 2.5" muffler ( LOL work in progress)
OS Giken twin disk clutch
solid aluminum engine and tranny mounts
apexi filter with 3" TID
KS chipped n374 ECU and AFC neo
worn bf goodrich drag radials 225/45R17's 19psi (heavy bastards)
#2
STUCK. I got SNOWNED!!!!!
iTrader: (7)
st. thomas fall prep is always ****.
I'm not surprised you're spinning in 4th. I bet you can't on the street either? That track is so shitty in the fall.
I stopped going in the fall in my RX-7 after shifting hard into 4th and staring at the wall for a 2nd when the car went completely sideways on my way to a 12.2@132.
Nice times tho, impressive. Especially for fall :P
I'm not surprised you're spinning in 4th. I bet you can't on the street either? That track is so shitty in the fall.
I stopped going in the fall in my RX-7 after shifting hard into 4th and staring at the wall for a 2nd when the car went completely sideways on my way to a 12.2@132.
Nice times tho, impressive. Especially for fall :P
#3
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
yeah i dont usually spin in 4th hahaahaha.... there was a slick spot on the track you could see the fog starting to sit above it. The fast cars started only runnin the 1/8th,
i left after i ran a 12.40 spinning my tires through 3rd and 4th gear, figured it wasnt the safest thing , i wish i could have got some better runs earlier on. the 60ft was the best i've ever felt they were letting me go right after the fast cars, i honestly have never hooked that hard , i had to relearn how to launch cuz i would do my usual sparta blow my tires off the line launch and would just grab and i'd bog it
im gonna go back to the dyno in the next few weeks ,see how much more power im makin, im gonna make a 3 " DP and get a 3"muffler next week im hopin for around 340ishwhp
320ft-lbs
i dynoed 313whp 289ft-lbs last year, but have change things to "Enhance" my set up lol
its alot more powerful than last year for sure...
i left after i ran a 12.40 spinning my tires through 3rd and 4th gear, figured it wasnt the safest thing , i wish i could have got some better runs earlier on. the 60ft was the best i've ever felt they were letting me go right after the fast cars, i honestly have never hooked that hard , i had to relearn how to launch cuz i would do my usual sparta blow my tires off the line launch and would just grab and i'd bog it
im gonna go back to the dyno in the next few weeks ,see how much more power im makin, im gonna make a 3 " DP and get a 3"muffler next week im hopin for around 340ishwhp
320ft-lbs
i dynoed 313whp 289ft-lbs last year, but have change things to "Enhance" my set up lol
its alot more powerful than last year for sure...
#5
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
yeah chandler tech in London they're good guys, they use to race with my dad and uncles back in they day so they gave me a good deal 8 pulls 80 bucks
im likin the sounds of those numbers! i cant wait to go back to the dyno
im likin the sounds of those numbers! i cant wait to go back to the dyno
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM