Buildup: 91 Vert, A-spec 500R + lots more.
09-15-08, 01:50 PM
#776
new paint
Join Date: Jul 2005
Location: Durham,NC
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Not sure where all the misinformation is coming from about the bodykit (could it be the peanut gallery? 
) so I will clarify.
Bodykits are only available through me since I designed them and am the only one with the molds. Each kit is made on a per order basis.
$2300 + shipping.
$1000 deposit to get the ball rolling and then $1300 + shipping due upon completion.
Sorry for the plug Juice
So far there are two cars with it installed. A 20b powered FC racecar ruuning around in SoCal and Juices. There was another kit shipped but I don't have any updates on that one. Customer was serving in Iraq when the kit was sent out.
) so I will clarify.Bodykits are only available through me since I designed them and am the only one with the molds. Each kit is made on a per order basis.
$2300 + shipping.
$1000 deposit to get the ball rolling and then $1300 + shipping due upon completion.
Sorry for the plug Juice
So far there are two cars with it installed. A 20b powered FC racecar ruuning around in SoCal and Juices. There was another kit shipped but I don't have any updates on that one. Customer was serving in Iraq when the kit was sent out.
09-15-08, 06:36 PM
#777
Shoot
I don't think anyone was trying to misinform Dave, I think people just wanted to have some fun guesstimating what Juiceh's car cost, but all told that adds about 1000-1500 more to my guess heheh.
09-22-08, 08:16 PM
#778
Rotary Enthusiast
Join Date: May 2005
Location: bartlett IL
Posts: 919
Likes: 0
Received 0 Likes
on
0 Posts
id say that if you added about 45% to that estimate, you would still be short of reality. The nickel and dime items are probably close to 10K. The new door and various other seals from mazda alone are over 900.
09-24-08, 01:53 PM
#782
Saiga-12 Power!
Thread Starter
iTrader: (4)
Join Date: Oct 2004
Location: N of Chicago
Posts: 4,384
Likes: 0
Received 0 Likes
on
0 Posts
Haven't been to the shop since last week. Probably won't be back over there till next week.
We ran into an issue with the seats fitting with the roll bar... Rather than cutup & take apart the seats to make them fit I'm gonna have to go another route. I'm looking for some Mazdaspeed sport seats or RE-Amemiya FC3S seats(basically recovered mazdaspeed seats). I thought I had a set of Mazdaspeed seats being held for me until I could verify the Cobra seats would work but that fell through. So I'm kinda *** out on that one. Probably have to pull the stock seats out of another vert for the time being since I threw the seats out that were in the car...
Anyone selling Mazdaspeed sport seats or Re-Amemiya seats please let me know...
The top fabric was selected and ordered. They are probably working on making the top right now. The top material is going to be made from AS5 "singed" cloth, same type of stuff porsche uses. The headliner will be made from a nice felt-like material.
Anyone want to buy my set of cobra seats with FC rails. They will fit in any FC, just not with my roll bar.
If I can't locate the seats I need, I may chop out part of the roll bar and have to redo it. I really don't want to do that though. I'm really tired of taking steps backwards... I should have just gone with a custom setup..
We ran into an issue with the seats fitting with the roll bar... Rather than cutup & take apart the seats to make them fit I'm gonna have to go another route. I'm looking for some Mazdaspeed sport seats or RE-Amemiya FC3S seats(basically recovered mazdaspeed seats). I thought I had a set of Mazdaspeed seats being held for me until I could verify the Cobra seats would work but that fell through. So I'm kinda *** out on that one. Probably have to pull the stock seats out of another vert for the time being since I threw the seats out that were in the car...
Anyone selling Mazdaspeed sport seats or Re-Amemiya seats please let me know...
The top fabric was selected and ordered. They are probably working on making the top right now. The top material is going to be made from AS5 "singed" cloth, same type of stuff porsche uses. The headliner will be made from a nice felt-like material.
Anyone want to buy my set of cobra seats with FC rails. They will fit in any FC, just not with my roll bar.
If I can't locate the seats I need, I may chop out part of the roll bar and have to redo it. I really don't want to do that though. I'm really tired of taking steps backwards... I should have just gone with a custom setup..
09-24-08, 04:10 PM
#786
Saiga-12 Power!
Thread Starter
iTrader: (4)
Join Date: Oct 2004
Location: N of Chicago
Posts: 4,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by trust7
Price for the Cobras ?
Originally Posted by Angry Earl
Has this build seriously taken over 2 years?
Originally Posted by ilia
It's a road racing car, earl. This ****'s serious. Can't rush it.
Last edited by Juiceh; 09-24-08 at 04:15 PM.
09-24-08, 04:30 PM
#787
Full Member
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Wow this is a sweet build. That's some serious wheel and tire. The cars looks kinda silly without the real wheels under it yet. Are you looking to compete in any race events? Scca? Roadcorse? What are you doing for suspension? Power goals?
09-24-08, 06:21 PM
#789
Full Member
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
could you please pull your **** out of your cornhole?
i posted that RIGHT after he posted the above post on my blackberry so i couldnt just hit F5 and refresh the page. but thanks for pointing it out. if you would like ill go ahead and edit it so you dont get more but hurt
and as far as reading the whole thread i was reading the whole thread and didnt find what i was looking for. didnt see any specific info on if he was going to race it at all and in what and were he was going to race it.
09-24-08, 08:19 PM
#791
Senior Member
iTrader: (1)
Join Date: Aug 2007
Location: Indiana
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
hi,
could you please pull your **** out of your cornhole?
i posted that RIGHT after he posted the above post on my blackberry so i couldnt just hit F5 and refresh the page. but thanks for pointing it out. if you would like ill go ahead and edit it so you dont get more but hurt
and as far as reading the whole thread i was reading the whole thread and didnt find what i was looking for. didnt see any specific info on if he was going to race it at all and in what and were he was going to race it.
could you please pull your **** out of your cornhole?
i posted that RIGHT after he posted the above post on my blackberry so i couldnt just hit F5 and refresh the page. but thanks for pointing it out. if you would like ill go ahead and edit it so you dont get more but hurt
and as far as reading the whole thread i was reading the whole thread and didnt find what i was looking for. didnt see any specific info on if he was going to race it at all and in what and were he was going to race it.
And that's not my ****, that would be Juiceh's ****.
09-24-08, 08:27 PM
#792
Full Member
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Let's make them drunken riots. I feel like drinking now that I saw that emoticon. 
At least we agree!
09-25-08, 12:45 AM
#798
Saiga-12 Power!
Thread Starter
iTrader: (4)
Join Date: Oct 2004
Location: N of Chicago
Posts: 4,384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blackball7
that's not my ****, that would be Juiceh's ****.
Originally Posted by El Nene 7
JUICE UPDATES BRO UPDATES!!!!
Your thread is getting bashed, post some pics so there wont be no riots...lol
Alex
Your thread is getting bashed, post some pics so there wont be no riots...lol
Alex
I did put my LED mirrors back together. I can't wait to install these on the car and see how they look. In the near future I'll start to work on my other LED mirror idea. Once I am able to install and wire these and the Tamon wing on the car I will take pics of them and post them. That stuff will get done as soon as the car is out of the upholstery shop.
09-25-08, 01:23 AM
#800
Full Member
Join Date: Jul 2008
Location: new mexico
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts