Project Naomi V : Finally PAINT!
5 Attachment(s)
A new year brings new pictures of the project - and what delicious pictures they are!
For anyone looking for the other project threads: Project Naomi I : New Project on an Old Favourite Project Naomi II : Giant Rotisserie Pictures Update Project Naomi III : End of Summer 2010 Update Project Naomi IV : Almost Off The Rotisserie Project Naomi V : Finally PAINT! Project Naomi VI : IT LIVES! Project Naomi VII : Coming Home ----- Before we get to the good stuff though, it's been many months since last update, so there are a few intermediate pics to get through first! Last we left off, the final bits of metal work had been taken care of, the doors got new skins, and the body was being taken through the stages of filler/sanding/primer to make it ready for paint. In one of my recent photo updates from Joe I found a great pic of the underside of the car that I didn't have before, and it shows a lot of the completed work there including the gas tank, lines, and all of the suspension, so I thought it was worth including: https://www.rx7club.com/attachment.p...1&d=1389154081 After much work filing and sanding and priming and preparing, things started to look pretty good. Heck, for a while I was starting to like the matte grey colour! Here are a few pics from the end of the primer-and-prep process, and from the paint booth just before paint went down: The hood https://www.rx7club.com/attachment.p...1&d=1389154081 They had hung the doors and fenders to make sure they could get everything perfectly even with the body, though they'd have to come off again later for final paint https://www.rx7club.com/attachment.p...1&d=1389154081 And finally the car was brought into the paint booth this past Friday, put up on stands, masked, and ready for paint! https://www.rx7club.com/attachment.p...1&d=1389154081 https://www.rx7club.com/attachment.p...1&d=1389154081 |
6 Attachment(s)
That brings us to Monday/Tuesday of this week and what we've all been waiting for - PAINT!
Here's a walk-around of the car in the paint booth: https://www.rx7club.com/attachment.p...1&d=1389154676 https://www.rx7club.com/attachment.p...1&d=1389154676 https://www.rx7club.com/attachment.p...1&d=1389154676 https://www.rx7club.com/attachment.p...1&d=1389154676 I thought that this close-up of the fender gave a nice view of the new paint https://www.rx7club.com/attachment.p...1&d=1389154676 Joe had already done the engine bay, but was standing there looking at it one day last week and thought "You know, this looks good... but it could really look great if I gave it a respray with the rest of the body" - and so he did! Originally I think we were using a flatter paint for the engine bay that was basically the same colour but without the mica. Honestly, I'm glad he decided to do the re-spray, it looks awesome! https://www.rx7club.com/attachment.p...1&d=1389154683 |
6 Attachment(s)
The doors also offered a good opportunity to show off the paint. The second image below is a close-up near the door-handle area. It doesn't show as well in the resized image, but if anyone wants the original 5mb image I'll share my dropbox link to it. With the full-sized one you can really see the detail in the speckle/mica if you zoom in and out.
https://www.rx7club.com/attachment.p...1&d=1389155210 https://www.rx7club.com/attachment.p...1&d=1389155210 And finally, another walk-around of the car now that it's out of the paint booth and sitting comfortably back on its wheels. There is still a huge amount of work to be done before it becomes a car again, not the least of which is the interior (dying the dash and seatbacks, installing the sound deadener, installing the new carpet). But this is a major milestone, and it really gets me stoked for how the project will turn out at the end :D https://www.rx7club.com/attachment.p...1&d=1389155210 https://www.rx7club.com/attachment.p...1&d=1389155210 https://www.rx7club.com/attachment.p...1&d=1389155210 https://www.rx7club.com/attachment.p...1&d=1389155216 Good things come to those who wait. |
Looks awesome!!
|
nice job!
|
Daaaayyyyyyum! That looks AWESOME! What paint code and brand is that? Is that K3 sunbeam silver? I had been going back and forth about changing mine to black from K3 silver, but seeing this makes me want to keep it silver. Awesome job!
|
Originally Posted by woodmv
(Post 11654964)
Daaaayyyyyyum! That looks AWESOME! What paint code and brand is that? Is that K3 sunbeam silver? I had been going back and forth about changing mine to black from K3 silver, but seeing this makes me want to keep it silver. Awesome job!
I was always partial to it, but now it looks absolutely amazing! |
Paint looks mint! Im gonna have to read the old topics now haha
|
nice paint! i need sunglasses just looking at it on my monitor.
|
That looks awesome!! I was wondering how this build was coming.
|
Originally Posted by sa7
(Post 11655364)
That looks awesome!! I was wondering how this build was coming.
|
I like the attention to detail on the undercarriage. Its like looking at a die cast model!
|
Originally Posted by NCross
(Post 11655852)
I like the attention to detail on the undercarriage. Its like looking at a die cast model!
showroom vehicle :nod: |
this is just sick!!!!!!!!!
I want this paint job. not to be nosey, but what would a job of this quality set me back $$? |
amazing quality body and paint job.
|
Originally Posted by ATC529R
(Post 11670540)
this is just sick!!!!!!!!!
I want this paint job. not to be nosey, but what would a job of this quality set me back $$? For the work Joe is doing (complete teardown, body work, paint, rebuild), that's about $14k, which should take the project to completion give or take. I also picked up about $3k of parts and misc things - a parts car for bumpers and fenders (that also donated a GSL rear end), new pads, rotors and calipers for that GSL rear, a full polyurethane bushing set, sound deadener, sound absorption matt, a new carpet kit, and a few other misc things that I can't recall right now. I've got a set of rims to refinish, need new tires, and will probably put a new stereo and speakers in it before the project is "done" this phase. So when all is said and done I should still be under $20k. Most people reading this right now are probably doing a double take, then shaking their heads. Yes, I could have bought an FD for that. I could have done MANY things with that cash, and it probably wasn't the most "responsible" place to spend it. But do I regret it? Not one bit, especially after seeing pictures like this! This car obviously has a lot of sentimental value to me, and while I'd never get even half that cost out of selling it, it doesn't matter. I drove it for many years before, and I hope to drive it for many years after. Projects like these are not for the faint of heart! |
Originally Posted by vipernicus42
(Post 11674935)
This car obviously has a lot of sentimental value to me, and while I'd never get even half that cost out of selling it, it doesn't matter. I drove it for many years before, and I hope to drive it for many years after.
Keep up the good work! |
That looks awesome!
|
I like where this is heading :bigthumb:
|
Pics look GREAT!!! You know, it is a lot of money to spend on the old FB but the car is in every way priceless. Think of it as if it were one of your children. You spend a lot more than that on raising kids.. and the car doesn't talk back and act like a damn animal at times.
|
2 Attachment(s)
Quick update:
Almost all the sound deadening is in place. For anybody who has never had to install sound deadener before, it's a hell of a job. Cleaning and prepping the surface, cutting the material to fit, then laying it and hammering it into place firmly so that it doesn't peel back and drop off on the first sunny day. It doesn't look like much but it must have taken ages to get done. I did a bunch on a friend's car and between the two of us, after a week it looked like we'd barely done anything! https://www.rx7club.com/attachment.p...1&d=1401066295 https://www.rx7club.com/attachment.p...1&d=1401066295 Joe says that the engine should be lowered in place and physically bolted in some time in the near future. Also, the door panels and headliner have been sent off to the upholsterer to get worked over. There's a lot of detail work for the interior pieces coming up - dying, upholstering, and installing of things. As soon as I have more pictures I'll post them up. Cheers, Jon |
this is beautiful! awesome job!
|
Originally Posted by vipernicus42
(Post 11742539)
For anybody who has never had to install sound deadener before, it's a hell of a job. Cleaning and prepping the surface, cutting the material to fit, then laying it and hammering it into place firmly so that it doesn't peel back and drop off on the first sunny day. It doesn't look like much but it must have taken ages to get done.
But for real, how clean did you need to get your surfaces to apply it? And, what type and thickness of material did you use? Thanks for the info! Your project looks freakin' amazing! I can't wait to get my K3 Sunbeam Silver metallic done some day. |
Originally Posted by woodmv
(Post 11742622)
...
But for real, how clean did you need to get your surfaces to apply it? And, what type and thickness of material did you use? ... For both my project and my friend Marc's car, we used Second Skin's Damplifier Pro. It's similar in many ways to the higher end Dynamat products, but when I bought it the cost was about half that of the Dynamat. There used to be a web page where the guy evaluated a whole bunch of sound deadening materials, putting them through all sorts of tests (like heating them in the oven or freezing them to see if they'd melt or unstick) to see how they compare. The only two that came out in the test that I'd bother using were Damplifier Pro or whatever the higher-end Dynamat was (Xtreme? Something like that). Don't use the cheap asphalt-based ones. One good day in the sun and it'll melt, stick to your carpets, and pool in the bottom of your doors and footwells. That's not something you want to have to deal with! |
Excellent, good to know! Thanks for sharing. I'm hoping that that part of my rebuild is just around the corner - installing sound deadening / heat shield. Was thinking 1/2 inch dynamat but I'll check out the Damplifier Pro. Still have some welding to do but thinking ahead.
|
All times are GMT -5. The time now is 12:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands