When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm taking a break from the paint to work on mechanical stuff for the first time in over a year. I cleaned up my past porting and ported the new center iron.
I forgot to take pictures of the end plates
I'm taking a break from the paint to work on mechanical stuff for the first time in over a year. I cleaned up my past porting and ported the new center iron.
I forgot to take pictures of the end plates
Smart move. You can really burn out with body work.
Here are the end plates. I did my best to clean them up but my original porting was horrendous.
I went back on my word and decided to get it primed. Its all ready except for masking. There is still some body work after the primer but I wanted to get the bare metal protected.
I finally have all the parts for the engine rebuild, and nothing else has been damaged (yet). It was supposed to be a cheap rebuild but she demands the best.
its tape, and unfortunately since this is my first time using 3m 2k I did not pull the tape off and now its stuck. I'm going to have to re do it so hopefully next weekend ill paint.
oh man I have an fb in a better condition and here I am sulking over not making progress. thank you for this motivation and looking forward to that red paint