Ultimate Street build NZ
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Full function rail installed! Hooray!
Also noteworthy if you buy and Xtreme rotaries under drive pulley kit and use the full function trigger wheel. You'll need to use the second idler pulley hole and the belt supplied will be too small. So ask for a bigger belt !!
How do I post pictures on here and have them big like yours?
Junior Member
Joined: Aug 2012
Posts: 13
Likes: 0
From: auckland, NZ
Man the build looks good. Love to see the nz rotor scene is good. i also saw this on trade me and if i didnt have mine i would of snapped it up. currently doing some more mods on my fd. hoping to get around the same power your aiming for.
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Proud moments!
Twin wastegates are gunna sing like a banshee!
Last look at the Os giken push pull conversion .. Very cool.
Will make removing the gearbox a breeze. Too many times I've lost my cool at the factory clutch set up!
Twin wastegates are gunna sing like a banshee!
Last look at the Os giken push pull conversion .. Very cool.
Will make removing the gearbox a breeze. Too many times I've lost my cool at the factory clutch set up!
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Update !!
I've picked up quite a few bits lately !
Decided on a black gauge to fit in with the dash and it looks great. Same red needle etc! Fits perfectly.
This is what $438nzd looks like in fuel fittings haha. All black everything!
So low!
Also picked up doen transmission parts
Mazdaspeed PPF
Banzai racing diff brace
Banzai racing transmission brace ...
... Now with these braces , is the MS PPF needed? Oh well :P
I've picked up quite a few bits lately !
Decided on a black gauge to fit in with the dash and it looks great. Same red needle etc! Fits perfectly.
This is what $438nzd looks like in fuel fittings haha. All black everything!
So low!
Also picked up doen transmission parts
Mazdaspeed PPF
Banzai racing diff brace
Banzai racing transmission brace ...
... Now with these braces , is the MS PPF needed? Oh well :P
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Real productive weekend!
Put the PPF , driveshaft , diff & trans braces in!
All the Banzai diff & trans brace fit like a glove without any issues!
Couldn't believe it actually.
Got some Time under the car to take another photo of the under car surgery tank and pump.
Now I've only got the oil loop line from the rear turbo oil return to the filler neck to finish!
Put the PPF , driveshaft , diff & trans braces in!
All the Banzai diff & trans brace fit like a glove without any issues!
Couldn't believe it actually.
Got some Time under the car to take another photo of the under car surgery tank and pump.
Now I've only got the oil loop line from the rear turbo oil return to the filler neck to finish!
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
Update.
Managed to get the car featured in the under construction section of Nz performance car. Pretty chuffed! Thanks Marcus.
Also after spending a week in Bali
I decided to sell the Pettit intercooler.
Visually I don't like it enough. So I'll be looking for a HKS vmount
Really love the clean look.
Also
Will be ditching the Xtreme Rotaries pulley kit, in favor of electric water pump and braided lines to the vmount radiator. With the vmount intercooler pipes sorrounding the eñgine and no water pump in the way with a side mounted alternator I hope to really show the engine block itself. So I can point at it and tell ppl that the small thing in the centre is the engine.
Unfortunately this is gauge holder is a fake and /or copy. It has no mounting points and the side cuts out arnt big enough for the indicators etc to go up .
Picked up a 2002 spec cluster from Rx7 boutique.
Can't wait for it to arrive !
Also added this to my toys.
11 years old ... One owner from new. So stoked
Check out my band Antagonist AD if you hardcore and metal.
https://m.facebook.com/antagonistad?_rdr
Managed to get the car featured in the under construction section of Nz performance car. Pretty chuffed! Thanks Marcus.
Also after spending a week in Bali
I decided to sell the Pettit intercooler.
Visually I don't like it enough. So I'll be looking for a HKS vmount
Really love the clean look.
Also
Will be ditching the Xtreme Rotaries pulley kit, in favor of electric water pump and braided lines to the vmount radiator. With the vmount intercooler pipes sorrounding the eñgine and no water pump in the way with a side mounted alternator I hope to really show the engine block itself. So I can point at it and tell ppl that the small thing in the centre is the engine.
Unfortunately this is gauge holder is a fake and /or copy. It has no mounting points and the side cuts out arnt big enough for the indicators etc to go up .
Picked up a 2002 spec cluster from Rx7 boutique.
Can't wait for it to arrive !
Also added this to my toys.
11 years old ... One owner from new. So stoked
Check out my band Antagonist AD if you hardcore and metal.
https://m.facebook.com/antagonistad?_rdr
Thread Starter
Full Member
Joined: May 2009
Posts: 191
Likes: 1
From: New Zealand
hKs vmount installed.
The kit is amazing. The fitement is like sugery and the thought and time that must have gone into is nothing short of amazing.
Although u I feel like I haven't used half of the kit as includes PS and AC relocation items.
Very happy!
The kit is amazing. The fitement is like sugery and the thought and time that must have gone into is nothing short of amazing.
Although u I feel like I haven't used half of the kit as includes PS and AC relocation items.
Very happy!
