Project D1's Project. . .lulz. . .
#27
Full Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Didn't get as much done as I would have liked today. . .weather was turning sour. . .
Cleaned up the brake hard lines and painted them. . .couldn't stand to put in them in without doing something to them. . .
Happy with the outcome. . .
Tested out a front wheel with the fender. . .happy with it so far. . .it will be interesting to see where it sits once the engine is back in etc etc etc. . .
Rotary Works elbow. . .very nice!
And as it sits tonight. . .
Also picked up some sort of dynamat sound deadening stuff, going to vacuum out the interior and place it in. . .I hope the weather is better tomorrow. . .
Cleaned up the brake hard lines and painted them. . .couldn't stand to put in them in without doing something to them. . .
Happy with the outcome. . .
Tested out a front wheel with the fender. . .happy with it so far. . .it will be interesting to see where it sits once the engine is back in etc etc etc. . .
Rotary Works elbow. . .very nice!
And as it sits tonight. . .
Also picked up some sort of dynamat sound deadening stuff, going to vacuum out the interior and place it in. . .I hope the weather is better tomorrow. . .
#31
Full Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Interested in selling said TB. . .if you're interested that is. . .
Made some progress today. ..weather was a bit better and was able to lug it into the shop. . .
Carbonetics clutch installed. . .very interesting. . .push/pull adapter included. . .very nice kit. . .highly recommend. .
Rotary Works V-mount system. . .not as impressed by the kit as I had hoped. . .a very nice kit indeed but some things weren't either planned out or I'm just very ****. . .
The bracket provided for support of the rad and IC required some re-drilling. . .the IC piping to the elbow needs to be replaced. . .(makes no sense IMHO because it's their complete kit with elbow. . .should all work together). . .
The pics shows everything assembled for sake of the picture. . .the piping doesn't line up well on the intake side. . .the length as well as the angle. . .
On the positive side, the IC piping is minimal. . .I love the overall design to it. . .It was easy to piece together and all the necessary hardware is provided. . .a favourable kit if you're willing to do the extra mile and do all the ducting etc (good bling as well. . .looking forward to seeing how well it cools)
Twin Precision 46mm Wastegates. . .
Made some progress today. ..weather was a bit better and was able to lug it into the shop. . .
Carbonetics clutch installed. . .very interesting. . .push/pull adapter included. . .very nice kit. . .highly recommend. .
Rotary Works V-mount system. . .not as impressed by the kit as I had hoped. . .a very nice kit indeed but some things weren't either planned out or I'm just very ****. . .
The bracket provided for support of the rad and IC required some re-drilling. . .the IC piping to the elbow needs to be replaced. . .(makes no sense IMHO because it's their complete kit with elbow. . .should all work together). . .
The pics shows everything assembled for sake of the picture. . .the piping doesn't line up well on the intake side. . .the length as well as the angle. . .
On the positive side, the IC piping is minimal. . .I love the overall design to it. . .It was easy to piece together and all the necessary hardware is provided. . .a favourable kit if you're willing to do the extra mile and do all the ducting etc (good bling as well. . .looking forward to seeing how well it cools)
Twin Precision 46mm Wastegates. . .
#38
Full Member
iTrader: (1)
Join Date: Jan 2005
Location: E-Town
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
one of the drift cars is fourkruzn on the site his is a gt35r setup run high teen boost other on has a 61 trim turbo don't think he on the site.
lee looking forward to see what power your make with that turbo and how the
4 kruzn motor takes it
lee looking forward to see what power your make with that turbo and how the
4 kruzn motor takes it
#41
Full Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
D-max D1 style is the closest thing I could find. . .
Drifting, nothing pro though, don't want a full cage, fire suppression etc etc etc. . .time attack, groceries, road trips, just enjoy the car everywhere. . .
Really debating building a full-out race car. . .especially after working on the Yokohama cars. . .
#45
Senior Member
iTrader: (5)
Join Date: Jan 2002
Location: edmonton alberta
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
for those who have facebook... here is a rundown of the first event, the 66 car busted the trans just before qualifying and managed to pull a rabbit out of his...ss. third gear only and made 10th place. the 20 car, me, made it to second place for the day. this was our first event out with the twin yokahama S-drive cars. t'was a great weekend. Next...!!! Edmonton Indy Drift Demo!!!! july 22-24 then round two, july 31 at stratotech park.
Lee... aka "project D1" missed qualifiying due to sleeping off a hangover in the camper...lol
sorry for jacking thread...
http://www.automotofoto.net/events/d...west-division/
enjoy!!
Lee... aka "project D1" missed qualifiying due to sleeping off a hangover in the camper...lol
sorry for jacking thread...
http://www.automotofoto.net/events/d...west-division/
enjoy!!
#46
Oreo
Join Date: Aug 2010
Location: Woodstock, Georgia
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
what hood are the yokohama rx7s running?
look nice, and loved the stretched look man, wouldn't personally do it but looks good, keep it up cant wait to see it done!
look nice, and loved the stretched look man, wouldn't personally do it but looks good, keep it up cant wait to see it done!
#49
Full Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
I got the tape from the other driver. . .just enough to do what I wanted. . .I'll ask where they got it from. . .pretty sure it's from one of the sponsors. . .(Mishimoto comes to mind. . .)