New Owner, New Goals, reliability FD build
#27
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
It was scheduled for me to pick it up November 6th, but I actually received a call this afternoon Saying that they just got done with the dyno tuning and its ready to go!!! I'll be heading up to Garland tomorrow around 8:30, and I'll be driving it back to expedite the break in process!
#28
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Mini Update!
Car is back and it is GLORIOUS! The guys at RP are amazing and communicate perfectly when you want to be left in the loop. I only have pics of the exhaust installed and random rolling shot coming back from Garland. I made 293whp which isn't crazy, but enough to make a few cars scratch their heads when I pass them while playing cat and mouse!
When I picked Moody Blue up:
Roling Shot:
ReinHard with Bonez DP and Midpipe:
Car is back and it is GLORIOUS! The guys at RP are amazing and communicate perfectly when you want to be left in the loop. I only have pics of the exhaust installed and random rolling shot coming back from Garland. I made 293whp which isn't crazy, but enough to make a few cars scratch their heads when I pass them while playing cat and mouse!
When I picked Moody Blue up:
Roling Shot:
ReinHard with Bonez DP and Midpipe:
#31
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
UPDATE!!!
Smoked Corners
R1 Lip (being painted)
Mats by JasonS (not Installed)
RE Column Pod (not Installed)
Efini Wheel (not Installed)
$9.00 PFC Mount!
The 2 reaons I haven't had a chance to Update this:
This Brat/Blessing...
and....
I BOUGHT A HOUSE!!!!
Debt-The American Dream.
Thats all Folks
UPDATE!!!
Smoked Corners
R1 Lip (being painted)
Mats by JasonS (not Installed)
RE Column Pod (not Installed)
Efini Wheel (not Installed)
$9.00 PFC Mount!
The 2 reaons I haven't had a chance to Update this:
This Brat/Blessing...
and....
I BOUGHT A HOUSE!!!!
Debt-The American Dream.
Thats all Folks
#33
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Quick question guys: What is the thread pitch of the wholes that you use to bolt down the seat back of the rear seat? They are in the trunk/cargo area for location reference. Thanks!
#34
OMG a Chupacabra!
iTrader: (26)
My parting gift from Rotary Performance! Really nice guys that still don't hesitate to answer my questions when I ask.
Quick question guys: What is the thread pitch of the wholes that you use to bolt down the seat back of the rear seat? They are in the trunk/cargo area for location reference. Thanks!
Quick question guys: What is the thread pitch of the wholes that you use to bolt down the seat back of the rear seat? They are in the trunk/cargo area for location reference. Thanks!
If so, there are two "dimples" on the shock tower. I drilled out and used two 10mm on each side. I have pics if this is what you are talking about.
#39
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Mini Updates!
Took a picture of her Sleeping:
Lip is painted and installed, did a little heatt sheilding on my lunch break.
[/URL]
Too dark for a installed pic now :-/
On to the heat sheilding:
#44
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Lol "winter" is right...
So I made a little bit of progress on the car as well as my garage over the past two days. I built a word table and also hung tire racks on the wall to get my stocks and enkei rpf1s off of the ground. And this morning I went ahead an installed my Nardi steering wheel and RE column pod instead of the Efini.
I was fortunate that the cheapo hub I bought allowed me to keep the clock spring so that I could wire in my cruise control as well as horn properly. Now I just need to find a place to mount my cruise control buttons.
If any of you are doing this anytime soon, don't forget your resistors for the airbag light.
They come in pairs and what you can do is solder them together, then wrap them in electrical tape and foam to reduce vibration.
There we have it!
I snapped this last quick pic at work... There are about 10 of us total with questionable daily drivers lol. What we're missing is a 91 MR2, 2006 Evo MR, 05 red S2000, 91 skyline GTS, and legit civic Type R and integra Type R. Can't complain about the people I work with at the end of the day....
So I made a little bit of progress on the car as well as my garage over the past two days. I built a word table and also hung tire racks on the wall to get my stocks and enkei rpf1s off of the ground. And this morning I went ahead an installed my Nardi steering wheel and RE column pod instead of the Efini.
I was fortunate that the cheapo hub I bought allowed me to keep the clock spring so that I could wire in my cruise control as well as horn properly. Now I just need to find a place to mount my cruise control buttons.
If any of you are doing this anytime soon, don't forget your resistors for the airbag light.
They come in pairs and what you can do is solder them together, then wrap them in electrical tape and foam to reduce vibration.
There we have it!
I snapped this last quick pic at work... There are about 10 of us total with questionable daily drivers lol. What we're missing is a 91 MR2, 2006 Evo MR, 05 red S2000, 91 skyline GTS, and legit civic Type R and integra Type R. Can't complain about the people I work with at the end of the day....
#50
Full Member
Thread Starter
iTrader: (5)
Join Date: Mar 2014
Location: Austin tx
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
New Aero!
I know its not much, but I had to share!!
Whole Template
99 Wing!!!
Haven't installed the end caps and main blade completely... "Why" you ask?
CARBON KEVLAR BABY!!!!
I know its not much, but I had to share!!
Whole Template
99 Wing!!!
Haven't installed the end caps and main blade completely... "Why" you ask?
CARBON KEVLAR BABY!!!!