Looks like the same billet collector I've had as desk art for years now waiting on doing the rest of the fabrication - nice....
https://cimg8.ibsrv.net/gimg/www.rx7...5d4537a4a0.jpg https://cimg9.ibsrv.net/gimg/www.rx7...fcd9306b4f.jpg https://cimg2.ibsrv.net/gimg/www.rx7...f6e57755ca.jpg |
In carbon roof updates!
|
Carbon Roof?!
|
Originally Posted by Blackadde///
(Post 12475734)
Dropped the car off last August (2020) to a fabricator who did nothing for 7 months. Finally got the car and money I pre-paid back. I've lost all hope in the car industry, but to far into the build to not finish her.
|
2 Attachment(s)
Yes, carbon roof updates eventually will be shared. I'm waiting for fab work and wiring to be done and then I'll drop it off for body work.
The fabricator was Rob Dham's guy. His name is Isaiah "fabrication father" Duran. I highly do NOT recommend using him. Anyway, I wanted to provide a progress update before I responded. I got my new Rouge Motorsports roll bar in. I was going to just have the fab guy make one, but after the debacle with him I decided to just buy one. Attachment 744302 Attachment 744303 |
You have very bad luck with people you sent this car to. Maybe it is cursed.
|
Originally Posted by TwinCharged RX7
(Post 12477532)
You have very bad luck with people you sent this car to. Maybe it is cursed.
|
Nice build. How much weight will the carbon roof save?
|
This is going to be one insane car when its done
|
12 Attachment(s)
Thanks! Guess I'll update...
Decided to replace all the 90's disintegrating foam underneath the dashboard and inside of the heater core/blower/evaporator with some new closed cell foam. Followed this write up on here for all three. https://www.rx7club.com/3rd-generati...hotos-1001759/ Attachment 743799 Attachment 743800 Attachment 743801 Attachment 743802 Attachment 743803 Attachment 743804 Attachment 743805 Attachment 743806 Attachment 743807 Attachment 743808 Attachment 743809 Attachment 743810 |
11 Attachment(s)
|
Damn fine job. Gonna have to try that.
|
That foam job is looking good!
|
5 Attachment(s)
Small things as I'm still waiting for the fab shop to fit me in.
Racebred front splitted, RGN canards, AI One Design Haltech IC-7 injection molded gauge cluster (didn't like the look of the carbon interior), Pioneer W4600NEX doubledin, Rouge Motorsports Recaro Pole Position seat rail sliders, and Useless Projects carbon rear privacy cover. Attachment 743622 Attachment 743623 Attachment 743624 Attachment 743625 Attachment 743626 |
7 Attachment(s)
Drivetrain is set in place at 2.90 deg. Modified the FischTech racing CD009 tranmission mount to push everything back 1.5"
Modified the V1 Samberg differential mount, so the exhaust would fit. Starting on front tube frame. We'll see how hard mounting the radiator works out. We were going to use isolaters, but wanted some rigidity with the undersweep being so close. I'll keep trying to update here, but more photos are on my IG. whitexdevil_fd3s Attachment 743410 Attachment 743411 Attachment 743412 Attachment 743413 Attachment 743414 Attachment 743415 Attachment 743416 |
I would take that fisch racing mount and weld it. See where the bolts go through to attach the leg to the main body of the mount? That is weak and broke on their diff mount of similar design. That's why they are redesigning it the diff mount.
They should have welded it from the start, as drilling 2 wholes through a narrow piece of metal and expecting it to be strong makes no sense. I would say they forgot to do the engineering during design stage. |
5 Attachment(s)
Hey TwinCharged, good idea. I may risk it and see how this holds up. I admittedly am thinking about going to a DCT setup, but we'll see how the CD009 holds up first.
Making progress. Attachment 743378 Attachment 743379 Attachment 743380 Attachment 743381 Attachment 743382 |
1 Attachment(s)
Cooling, fuel, and oil lines are complete.
Working on the intercooler and titanium charge piping next. Attachment 743332 |
5 Attachment(s)
|
That's a beauty. Looks like you finally found a good place to depend on. Knock on wood :)
|
I heard Floyd Mayweather is gonna fight this car for the title belt. PPV and all that. Just what I heard...
|
Originally Posted by Blackadde///
(Post 12510821)
https://i.imgur.com/cO4kBUC.jpg
https://i.imgur.com/gVox0Dk.jpg https://i.imgur.com/A2GODFq.jpg https://i.imgur.com/2mFgH8m.jpg https://i.imgur.com/OkqhMi1.jpg Love this build! Congrats buddy |
2 Attachment(s)
|
1 Attachment(s)
|
Very cool with the different lengths.
|
All times are GMT -5. The time now is 11:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands