CALI Grown E85 Street Car: Project BLACKADDE
So, I started this project last August thinking that I was going to leave the car at the body shop to install the RE-Amemiya ADGT widebody, and then I decided I wanted to do just a few small upgrades. :rolleyes:
It began with wanting to port the motor to go single, run E85, completely redoing the suspension, new interior, really putting a brand new car together. I even got some nice valve stem caps. :rofl: I'm hoping by posting this thread I'll get some more motivation to finish the project. I'm trying to take her to Seven Stock XII this year, but unfortunately with a full time college students budget it doesn't look like it's going to happen. So, I'm currently in the process of looking for sponsors to bring my baby to life. Ben "Karack" @ Rotary Evolution in Northern California is engine builder/tuner, and will be updating us with pictures of the engine build. We'll also be doing a battery relocation to the rear passenger bin & wire tuck of the engine harness/fuse boxes. Anyway, hope everyone enjoys the build thread. MOD LIST Some of these parts will change as we get down to the finish. ENGINE: Large Street Port RA 2mm Super Seals Atkins Gasket Kit Atkins Thermal Pellet Atkins Solid Corner Seals OEM 2mm Apex Seal Springs OEM Corner Seal Springs OEM Side Seals OEM Side Seal Springs OEM O Rings OEM Oil Control Rings OEM Oil Ring Springs OEM Front & Rear Main Seal OEM Pilot Bearing & Seal OEM Rotor Bearings OEM Stationary Gear Bearings FUEL: (E85) CJ-Motorsports Fuel Rails Injector Dynamics 6 x 1000cc Kevlar Enforced Aeroquip Startlite Hose Aeromotive 13109 Fuel Pressure Regulator Aeromotive Eliminator Fuel Pump Aeromotive P/N 12304 & P/N 12335 Fuel Filters ATL Fuel Cell SUSPENSION/DRIVETRAIN: Exedy Twin Plate Cerametallic Clutch ZM022SD AtomicRex Aluminum Manual Steering Rack WideFoot SwayBar (Mounts, Bearings, & Spacers) Tri-Point Engineering Front & Rear Sway Bars Super Now Toe Links Super Now Trailing Arms Super Now Tie Rod Ends Delrin Bushing Set OEM Pillowball Bushings/Dust Seals FEED Tower Bar COOLING:: Koyo N-Flow GReedy 3 Row FMIC FEED Throttle Body Elbow FEED Ported Throttle Body RE-Speed Oil Filler Neck RE-Speed Oil Filler Pedestal -10 Super Now Main Pulley Super Now Water Pump Pulley Super Now Alternator Pulley Xcessive Lower Intake Manifold EXTERIOR: RE-Amemiya ADGT WideBody RE-Amemiya AD9 CF Bonnet RE-Amemiya FRP Fender Mirrors Carbon Fiber Hatch Flying 'M' Badges Feed Halogen Turn Lamps OEM 99 Spec Rear Turn Lamps WHEELS TBA!!!!!! Looking for sponsors!!! INTERIOR: RaceShop 4pt Roll Bar Brand New OEM (Gauge surround, hood, chrome bezel, a/c panel, shifter panel, shifter surround) FlyRX7 60mm Tripod OMP WRC Steering Wheel NRG (Quick Release v2.0, Lock, & Adapter) RE-Amemiya Scuff Plates RedLine Italian Leather Shift Boots JDM Arm Rest Pad Sparco Evo CF Racing Seats ELECTRONICS: Microtech LT-10 HKS EVC Boost Controller DEFI BF Boost DEFI BF Fuel Pressure DEFI BF Oil Pressure DEFI BF EGT Innovative LC1 Wideband EXHAUST: Apexi GT Spec Custom 4" turbo Back V-Band TURBO: TBA!!! Not sure what I'm doing yet. MISC: Rotary13B1 Rotor Dipstick Rotary13B1 Rotary Engine Keychain Rotary13B1 Valve Stem Caps FEED Oil Filler Cap FEED PS Reservoir Cap Xcessive Oil Pan http://i129.photobucket.com/albums/p...tos/Hooola.jpg Boxes of goodies. http://i129.photobucket.com/albums/p...otos/boxes.jpg M2 4 point roll bar. http://i129.photobucket.com/albums/p...0photos/M2.jpg RE-Amemiya ADGT Widebody. http://i129.photobucket.com/albums/p...hotos/adgt.jpg Some random stuff. http://i129.photobucket.com/albums/p...tos/Random.jpg FEED Throttle Body Elbow. http://i129.photobucket.com/albums/p...tos/FEEDTB.jpg FEED Strut Bar. http://i129.photobucket.com/albums/p...os/feedbar.jpg |
Fuel Rails custom anodized purple.
http://i129.photobucket.com/albums/p...hotos/fuel.jpg Some brand new interior stuff... there's actually a lot more than this. Going for the brand new car smell. :rofl: http://i129.photobucket.com/albums/p...s/interior.jpg Manual Steering rack. http://i129.photobucket.com/albums/p...manualrack.jpg Some suspension stuff. http://i129.photobucket.com/albums/p...suspension.jpg |
WOW! Thousands of dollars worth of parts laying around. gimmme!
Can't wait to see the finished project! Good luck! |
Nice! What color are you going with? And lemme get some of those bushings ;)
|
What were the winning numbers? I want to double check my numbers... :bigthumb:
|
Looking good can't wait to see it done!
|
Originally Posted by MakoRacing
(Post 9376258)
Nice! What color are you going with? And lemme get some of those bushings ;)
Deciding between Triple Black, midnight purple ii, or opal black. The last 2 are from GTR's. |
Very purple :D!
The build looks GREAT, you'll love that exhaust setup and clutch :icon_tup: Mucho Beaucoup bucks spent, you may have more cashola into your build then I do :lol: If you need any parts powder coated a nice purple, let me know and I'll set you up with my guy in Texas :) Also, I'll PM you later about some engine internal info. |
so your not in PA?! i wanna see this beast!
|
Sounds like a great build, especially for a college student! It sounds like you are into modding and might ge tired of driving a purple car, so I would suggest going with a more subtle OEM purple. Midnight Pearl from the 95-96 NSX is a beautiful color that transforms based on light between blue/purple/black. I can only think of one or two purple FDs and I don't think anyone has utilized this color yet (correct me if I'm wrong). Check it out...
http://www.nsxprime.com/photopost/da...003042618X.JPG http://www.enkrypted.com/nsx/rims/IMG_8488.jpg https://img14.imageshack.us/img14/5007/1aaaansx2bo.jpg As you can see, MP looks good with silver/gold/gunmetal (probably black with polished lip, etc). I'm not trying to crap up your thread, so let me know if you want me to take the pictures down. Either way, can't wait to see the finished product! |
niiice... ben built my shit, he does a helluva job. maybe ill stop by n check it out some time, looks like its goin to be a good turn out.
when do you plan on taking it? |
Opal Black man, so you and I can be nissan pearl buddies!
Your build list is looking awesome. Can't wait to see some progress pictures :) |
very nice stuff!!!
|
You wanted wheels?
What kind do you want? |
can't wait for more updates
|
Thanks everyone, I can't wait to finish it as well. :rofl:
Originally Posted by GoodfellaFD3S
(Post 9377674)
Very purple :D!
Also, I'll PM you later about some engine internal info.
Originally Posted by 4CN A1R
(Post 9377871)
so your not in PA?! i wanna see this beast!
Originally Posted by Rice Hata
(Post 9378013)
As you can see, MP looks good with silver/gold/gunmetal (probably black with polished lip, etc). I'm not trying to crap up your thread, so let me know if you want me to take the pictures down. Either way, can't wait to see the finished product!
Originally Posted by ImStillOnJava
(Post 9379034)
Opal Black man, so you and I can be nissan pearl buddies!
Your build list is looking awesome. Can't wait to see some progress pictures :)
Originally Posted by smog-guy707
(Post 9378786)
niiice... ben built my shit, he does a helluva job. maybe ill stop by n check it out some time, looks like its goin to be a good turn out.
when do you plan on taking it? The engine is already at his place. I'll have the car up to him by mid august I hope.
Originally Posted by Miata_mx5
(Post 9379540)
You wanted wheels?
What kind do you want? Not sure yet on the wheels. I'd like SSR SP1, Work Meister S1 3pc, ..... We'll see what the budget has to say about that. |
I'm afraid the Opal black only came on the Spec-V GTR in Japan. You won't get it here in the states.
http://www.madwhips.com/upload/image...33-800-600.jpg mmmm :) I'm curious of more people's impressions of the AtomicRex kit, once you get that going - definitely post up a review please! I'm on the fence about it. |
I'll let you know Carol. I'm hoping Gordon's assessment of "Better than any of my BMWs or any Porsche I have owned or even my Ferrari." is dead on. I'm really looking for that go-kart feel.
Gordon, thanks for the praise. I know I'm going a little over board with the new interior stuff, but if I'm making everything else brand new; why not go all out?!?! haha |
looks like all of the parts are coming together nicely, looking forward to more updates.
|
WOW. lots of money invested cant wait to see it finished
whats your time frame |
Originally Posted by MotoTek
(Post 9376224)
So, I started this project last August thinking that I was going to leave the car at the body shop to install the RE-Amemiya ADGT widebody, and then I decided I wanted to do just a few small upgrades. :rolleyes:
|
Originally Posted by Patrick@RHDJapan
(Post 9389047)
looks like all of the parts are coming together nicely, looking forward to more updates.
Ben, should be posting pics up soon of the tear down on the engine. I also talked with Laura @ Rotary Aviation and I should have my apex seals by monday.
Originally Posted by oneniceride
(Post 9389642)
WOW. lots of money invested cant wait to see it finished
whats your time frame
Originally Posted by purerx7
(Post 9389678)
It always starts off that way, unfortunately it never ends up being that way. I remember back in the day when I just wanted to do wheels and a drop. Well, $30,000+ later I still don't have a drop and I am on my 5th set of wheels. Mmmmm the joys of car modifications.
And just to show some eye candy. 99 spec turn lamps courtesy of Ari. http://i129.photobucket.com/albums/p...l/DSCF4942.jpg http://i129.photobucket.com/albums/p...l/DSCF4944.jpg |
Originally Posted by MotoTek
(Post 9390920)
Tell me about it. haha Did you ever find those coilovers for me? |
Originally Posted by MotoTek
(Post 9390920)
And just to show some eye candy. 99 spec turn lamps courtesy of Ari.
Ohhh niceeee |
Those 99 spec tails set you back just a little bit......dealing with Chris and Ari is great b/c they have everything in stock :)
|
All times are GMT -5. The time now is 11:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands