Bubbles Build Thread
#276
Non Runner
iTrader: (3)
Most companies stitch into the original dash cover to keep the shape intact. I ripped the covering off an old dash I have and most of it parted from the foam okay, but not all.
I didn't think I'd be a fan of the pink, but the whole pink & white theme actually looks pretty darn good imo
I didn't think I'd be a fan of the pink, but the whole pink & white theme actually looks pretty darn good imo
#279
Most companies stitch into the original dash cover to keep the shape intact. I ripped the covering off an old dash I have and most of it parted from the foam okay, but not all.
I didn't think I'd be a fan of the pink, but the whole pink & white theme actually looks pretty darn good imo
I didn't think I'd be a fan of the pink, but the whole pink & white theme actually looks pretty darn good imo
as far as covering over it im worried that the added thickness of material would cause problems for the plastic trim to seat well over it?
den the white cage looks dopee, hm pink or white. pink or white...........
tough call, the white looks clean, but the pink will have that uber pop factor!
#280
PROGRESSION.
GUTTING.
pos carpet that is still damp from god knows when. my coolant leaked into the car cuz the heater core was leaking and its still absorbed into the carpet... this will be fun trying to salvage it.....
some parts taken out... headlights, wires for gauges, stereo etc..., water meth...
body harness removed just need to snake it out of the wheel wells... then ill begin relocation stuff...
trunk
interior... as you can see i previously quiet coated the car... i didnt do the firewall and the drivers side looks like a PITA to get the liner off (bc of the pedals) so im just going to do the passenger side (since the noise comes from that side anyways) and probably recoat the inside a little thicker
intercooler outt.. gotta get it modified for vmic.. but that wont be for a few weeks
misc parts removed around the garage... mostly interior plastics
GUTTING.
pos carpet that is still damp from god knows when. my coolant leaked into the car cuz the heater core was leaking and its still absorbed into the carpet... this will be fun trying to salvage it.....
some parts taken out... headlights, wires for gauges, stereo etc..., water meth...
body harness removed just need to snake it out of the wheel wells... then ill begin relocation stuff...
trunk
interior... as you can see i previously quiet coated the car... i didnt do the firewall and the drivers side looks like a PITA to get the liner off (bc of the pedals) so im just going to do the passenger side (since the noise comes from that side anyways) and probably recoat the inside a little thicker
intercooler outt.. gotta get it modified for vmic.. but that wont be for a few weeks
misc parts removed around the garage... mostly interior plastics
#282
Merry christmas to meee!
goodbye christmas and birthday money....
Contents...
FC oil cooler
Heater core
Fuse box
Brake pads for the MPV aka parts van
Pioneer p4200 head unit =) =) =)
12x bur9eq's for 55 BUCKS! =) gotta stock up since they are a BITCH to find...
goodbye christmas and birthday money....
Contents...
FC oil cooler
Heater core
Fuse box
Brake pads for the MPV aka parts van
Pioneer p4200 head unit =) =) =)
12x bur9eq's for 55 BUCKS! =) gotta stock up since they are a BITCH to find...
#285
autozone doesnt carry them anymore
pepboys NEVER has them, not sure if they carry em
advance auto you have to order them
napa is 50/50
but with that said they are all like 8 bucks each... how much do you pay?
yes sir i sure do hope it fits... i was thinking... what if i kept the stock oil cooler and added the FC oil cooler (in between the VMIC) and run them in series? or should i just stick with the single fc oil cooler
#288
F yo couch!
iTrader: (6)
Join Date: Feb 2007
Location: Belleville, NJ
Posts: 2,321
Likes: 0
Received 0 Likes
on
0 Posts
we are a dying breed after all, just watching the amount of traffic on this site compared to 4 years ago proves that
#289
dorito powered
iTrader: (5)
Join Date: Mar 2008
Location: Lincoln, NE
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
five bucks, last time I bought plugs (2 7's and 2 9's) I spent just over 20 bucks after tax, that was a while ago though since I blew my motor last spring. Although we've got a few rotary guys that just happen to work at the parts store, so that might help.
#294
Original Gangster/Rotary!
iTrader: (213)
Looks like the connector for the A/C drier..... the small can that fits into the stock IC duct. Not positive though, been a long time since I've messed with A/C
#296
Not much of an update.. just placed an order for spools of wires, crimps, heat wrap etc...
been untangling/deleting some wires in the meantime...
The wire above^^ yellow/orange is actually for the front right abs (just for reference purposes)
some pics of absolutely nothing.
been untangling/deleting some wires in the meantime...
The wire above^^ yellow/orange is actually for the front right abs (just for reference purposes)
some pics of absolutely nothing.
#298
yanno, its actually not that bad. everyone says its a nightmare but its not, just take your time i actually find it quiet soothing. its kind of enjoyable for me haha
spools of wire should get here on friday... hopefully monday ill get to put in some work and tidy it up a bit!
spools of wire should get here on friday... hopefully monday ill get to put in some work and tidy it up a bit!
#299
Looking good, I just got finished removing the factory fuseboxes, relocating the body harness to inside the car, and building a new relay/fuse panel to complete the "tuck". I'm with you on the soothing part, give me my music and leave me alone and I'm fine haha.