Another Poor College Build, because there are never enough
#153
It's getting there, spent most of the day with the other lady haha. Got mostly everything rewired. Most of the time has been cleaning up. starting to lose track of tools etc. The only one I'm stuck on is the 3d wire. That plug (yellow 16pin) is still attached to the stock harness. Or did I miss read the connector diagram?
#157
Vid finally loaded lol
7CD72087-3C02-4208-A39E-813705624EB0-486-0000002F537A1BD1_zpsf46c50fc.mp4 Video by lotus_fd3s | Photobucket
And one of her finally running under her own power
90276858-4E1A-43FC-A8F5-29494BB728A9-677-000000423A32861B_zpsecc1e52d.mp4 Video by lotus_fd3s | Photobucket
jacob, can't thank you enough for helping me sort out the wiring!. Still need to figure out the thermoswitch one and figure out why I can't get the idle lower than 2k, but its getting there!
7CD72087-3C02-4208-A39E-813705624EB0-486-0000002F537A1BD1_zpsf46c50fc.mp4 Video by lotus_fd3s | Photobucket
And one of her finally running under her own power
90276858-4E1A-43FC-A8F5-29494BB728A9-677-000000423A32861B_zpsecc1e52d.mp4 Video by lotus_fd3s | Photobucket
jacob, can't thank you enough for helping me sort out the wiring!. Still need to figure out the thermoswitch one and figure out why I can't get the idle lower than 2k, but its getting there!
#159
Haha, I think my brother (guy at the end of the vid) is almost as excited as I am.
D'OH! I forgot to hook up the brake booster vac line That would be it and why I didn't have brakes when backing it up Got so caught up in the fact that it was running
Turbo is a gt35/40r, and the vmount is custom! Designed/built it in an apartment parking lot haha~ Had a few renditions since that one, but pretty much the same. Used my koyorad with a modified end tank and my old greddy FMIC. Cut the inlet/outlet for the endtanks and just turned them around. Turned out better than I ever expected! Might be some of the shortest IC piping I've seen on the club haha.
D'OH! I forgot to hook up the brake booster vac line That would be it and why I didn't have brakes when backing it up Got so caught up in the fact that it was running
Turbo is a gt35/40r, and the vmount is custom! Designed/built it in an apartment parking lot haha~ Had a few renditions since that one, but pretty much the same. Used my koyorad with a modified end tank and my old greddy FMIC. Cut the inlet/outlet for the endtanks and just turned them around. Turned out better than I ever expected! Might be some of the shortest IC piping I've seen on the club haha.
#162
Running a 1.06 hot/ .86 cold, precisions are sweet. Good response, good power and make killer noise I'm personally only planning on running about 14-15lbs on mine low boost saves motors! haha
Was triple checking again trying to find that wire for the thermoswitch. 3D is definitely on the connector for the stock harness (16pin) White/blue.
Pic, my finger is on the wire that you suggested I splice for the thermoswitch:
Was triple checking again trying to find that wire for the thermoswitch. 3D is definitely on the connector for the stock harness (16pin) White/blue.
Pic, my finger is on the wire that you suggested I splice for the thermoswitch:
#169
Try that.
And lol now i'm debating removing the front harness or not should just leave it alone but...man i just want to ditch that thing so bad.
#171
just for you jacob lol
the first test drive from around the block:
8353F040-5274-40B9-B98D-B79354AD44CC-5576-000003AE298D954D_zps36466cf3.mp4 Video by lotus_fd3s | Photobucket
the first test drive from around the block:
8353F040-5274-40B9-B98D-B79354AD44CC-5576-000003AE298D954D_zps36466cf3.mp4 Video by lotus_fd3s | Photobucket