93 Digicamo "The Beater" RX7
#285
Whelp Jakes decided to give us a healthy discount and we now have an all billet 4l80e being built for us :cheers:
Since it will have a trans brake this was needed
Have a 3.08 gear sitting in a box for it aswell. Going to upgrade to walbro 485 dual pumps and bigger injectors e85 time :chug: Hopefully get all this done before 2014 then save up for new wheels and shine burnout fenders.
Since it will have a trans brake this was needed
Have a 3.08 gear sitting in a box for it aswell. Going to upgrade to walbro 485 dual pumps and bigger injectors e85 time :chug: Hopefully get all this done before 2014 then save up for new wheels and shine burnout fenders.
#289
Your tail lights. I want them. Or at least you can point in the direction of how to find some for myself lol.
And yeah, the same as jacob ^^
I saw the video of your car getting whooped on by a POS MR2 with a honda motor. But what really stuck out was the tail lights on the 7. I instantly fell in love and have been doing research for an hour now to figure out who has them on what car.
And yeah, the same as jacob ^^
I saw the video of your car getting whooped on by a POS MR2 with a honda motor. But what really stuck out was the tail lights on the 7. I instantly fell in love and have been doing research for an hour now to figure out who has them on what car.
#291
Oh no doubt it is faster. That thing is nasty man. I've watched a few videos on it that 1320 puts up and it by no means is a POS. I was just throwing a little tough love at it
If it's a one off, I wouldn't mind getting in touch with the fella's and finding out how they wired it, and what sort of LED array(s) they used. It looks like 4 different LED strips probably on 2 or 3 relays.
If it's a one off, I wouldn't mind getting in touch with the fella's and finding out how they wired it, and what sort of LED array(s) they used. It looks like 4 different LED strips probably on 2 or 3 relays.
#292
A belgium guy of the name rx_sam did a few of them I was lucky to nab a set and now everyone wants them lol. He used high quality german leds and just hard mounted them in the reflector. I have a few friends who want these or similar and I have been itching to do a few changes. My 3rd brake light is just a simple bar mounted to the hatch
#293
Full Member
iTrader: (2)
Join Date: Feb 2005
Location: AZUSA, CA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
didnt know where to post this. so ill leave it here.
Video: Street Race Car Of The Week: Toyota MR2 With A 900HP Honda K20 Engine Dominates The Streets Of Florida! (Beast)
edit: youtube link
around 1:35
Video: Street Race Car Of The Week: Toyota MR2 With A 900HP Honda K20 Engine Dominates The Streets Of Florida! (Beast)
edit: youtube link
around 1:35
#294
Been neglecting updating this lol... did a few things
Swapped the rear gear to a 3.08 now have an end of gear of 244 with a 28in tall tire
Did a few track legal things, SFI flexplate dampner and a driveshaft loop
Built a custom shifter linkage on the trans so we can use our first run 4l80e with a sidewinder gated shifter. Very solidly mounted.
Exhaust was originally from a car that had a t56, hung low and had a center blow through resonator that really killed ground clearance. Reworked and tucked up.
Swapped the rear gear to a 3.08 now have an end of gear of 244 with a 28in tall tire
Did a few track legal things, SFI flexplate dampner and a driveshaft loop
Built a custom shifter linkage on the trans so we can use our first run 4l80e with a sidewinder gated shifter. Very solidly mounted.
Exhaust was originally from a car that had a t56, hung low and had a center blow through resonator that really killed ground clearance. Reworked and tucked up.
#295
Senior Member
Join Date: Nov 2005
Location: ft. myers, fl
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
i've stopped posting here since i sold the car, but its amazing to see what you've done to my old car man. truly awesome.
i never had the income to make it what i wanted, but you've gone above and beyond. awesome car.
i never had the income to make it what i wanted, but you've gone above and beyond. awesome car.
#296
Picked up this cowl hood off craigslist for a good deal, hope this helps with highspeed drag vs no hood
Going to need to trim the sides a lil bit and cut a slip for the wiper if I want to keep them.
Managed to get my buddy Fred of Conkling Auto to donate the matching front wheels to our cause aswell! going to rebuild these to 17x11 for the rear and move the current rear(17x10) to the front. going to run 275/40 fronts and 315/35 r888 rears for street driving + roll racing and be able to slap on the mickeys for events. Yay for matching front and rears soon!
Going to need to trim the sides a lil bit and cut a slip for the wiper if I want to keep them.
Managed to get my buddy Fred of Conkling Auto to donate the matching front wheels to our cause aswell! going to rebuild these to 17x11 for the rear and move the current rear(17x10) to the front. going to run 275/40 fronts and 315/35 r888 rears for street driving + roll racing and be able to slap on the mickeys for events. Yay for matching front and rears soon!
#299
Well we get out to bradenton and there is no racing going on so we pull off the trailer and say we will race anything. They are the first to step up saying sure why not we are here to racing anything too. All we knew was it was a k20 swapped mr2. We are staging for the roll and you her the shush shush shush of the dogbox and all we can think was whelp this is over they have more $$ in that transmission than my power train. The fireballs it shot were huge. It put 94X hp down in their previous drag car so i doubt it was making any less. We lost that race before it started they weighed less and had more power. We are still sorting out tranny issues then we are going for an e85 tune should put us at 1kwhp and a rerun is on the table, should be more fair and fun.