20B N/A side port street car build from the UK
#57
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Phil.
Got some plates to take to the machine shop tomorrow to be modified for my xtreme rotaries stud kit and the UIM will have the required nipple welded on for the brake servo.
Got some plates to take to the machine shop tomorrow to be modified for my xtreme rotaries stud kit and the UIM will have the required nipple welded on for the brake servo.
#65
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
I hope these pics are a bit better but please remember I have no camera or computer this thread is 100% iPhone!
Fixed the broken door mirror, turns out it wasn't the mirror but more a broken screw head so drilled it out and got lucky saving the thread and removing the drill! Many thanks to Swanny for not dropping the drill!
Anyway brake and clutch lines, yes I know I could hide them but if I'm honest you don't really see these against the white anyway and I have used the rubber over laid hose so not damaging the paint
All the clips are rivnuted and bolted for easy removal if needed.
Also see last page for more pics off this
Fixed the broken door mirror, turns out it wasn't the mirror but more a broken screw head so drilled it out and got lucky saving the thread and removing the drill! Many thanks to Swanny for not dropping the drill!
Anyway brake and clutch lines, yes I know I could hide them but if I'm honest you don't really see these against the white anyway and I have used the rubber over laid hose so not damaging the paint
All the clips are rivnuted and bolted for easy removal if needed.
Also see last page for more pics off this
#67
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Massive update!
3 'C' weight FD-REW rotors
Cusco branded but it's a Exedy twin plate
All the loom, coils and injectors as well as fuel rails off the last 20B build
Stock port
My port
My BBS fresh from the powder coaters 9J ET20 all round more pics later!
Mishimoto LS swap rad
Powder coated subframe in
LIM tweaked to allow fuel rail to clear
3 'C' weight FD-REW rotors
Cusco branded but it's a Exedy twin plate
All the loom, coils and injectors as well as fuel rails off the last 20B build
Stock port
My port
My BBS fresh from the powder coaters 9J ET20 all round more pics later!
Mishimoto LS swap rad
Powder coated subframe in
LIM tweaked to allow fuel rail to clear
#70
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Coils mounted
Another step closer to being on its wheels for the first time in months!
Apexi N1 Pro's
All 4 fitted but only took 2 pics as I'm lazy!
As soon as my adjustable rod for my push pull converter shows up from OS Giken and my new clutch slave is here I can have the lads round to help get the box, PPF and prop in then drop it to the floor as I hope my calipers will be back from Big Red by then too!
Nickel plated then skimmed RS/RZ larger disks
Well I'm still working on it!
Calipers back from Bigg Red.
Only opened one front so far very impressed!
Another step closer to being on its wheels for the first time in months!
Apexi N1 Pro's
All 4 fitted but only took 2 pics as I'm lazy!
As soon as my adjustable rod for my push pull converter shows up from OS Giken and my new clutch slave is here I can have the lads round to help get the box, PPF and prop in then drop it to the floor as I hope my calipers will be back from Big Red by then too!
Nickel plated then skimmed RS/RZ larger disks
Well I'm still working on it!
Calipers back from Bigg Red.
Only opened one front so far very impressed!
#71
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Again lazy pics as its late!
Will be fitting the further modified LIM as soon as its back from the machine shop and doing a full nut/bolt check then it's onto it's wheels! Yay!
In for the last time!
Nice O clips on the fuel line
It's mega close and might even touch but covered in Zircotec heat management down there it will be ok
Must be 24 anyway this happened!
#72
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Bagged this today
Got the spot weld drill, hammer and chisel out to make space!
Finished UIM
Start of the EWP and hoses
And got material I can sell people that want one too!
First bit of the water hoses
Pics of said hose ...
Got the spot weld drill, hammer and chisel out to make space!
Finished UIM
Start of the EWP and hoses
And got material I can sell people that want one too!
First bit of the water hoses
Pics of said hose ...
#73
Full Member
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: cheshire, england
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
The slightly nasty looking bits of coolent hose are there to stop any rubbing on the sharper edges of the shell.
Just got to get a right angle drill now to be able to put the filter relocation kit on the shell and then the oil system is done.
Finished up AST just needs powder coating now.
It's been modded to take the water temp sensor for the EWP and for my temp gauge.
Also had the nipple added for the small hoses at the bottom of the rad.