thelevman 534rwhp 24psi water only
#1
thelevman 534rwhp 24psi water only
Hey guys a good friend Levin finished doing some upgrades to his car recently it has a GT3788r and a raceonly 13b street port it idles smooth at 900rpm and tuned by me it has a fairly old rice racing water injection kit ill try and attach the dyno sheet doing this from my phone
#4
if we hook it up the haltech we probably can. What you cant see is the mixtures are going very rich over 7500rpm and i didnt trim it out too much as i want to find out first why mixtures are going that rich. If their is no reason then i will trim it out and the power will go for longer. Levs gona do some testing and well see what we get back from that.
#7
Junior Member
Join Date: May 2006
Location: Townsville, Australia
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
if we hook it up the haltech we probably can. What you cant see is the mixtures are going very rich over 7500rpm and i didnt trim it out too much as i want to find out first why mixtures are going that rich. If their is no reason then i will trim it out and the power will go for longer. Levs gona do some testing and well see what we get back from that.
Trending Topics
#9
Correction was on roughly .997 as I leave the air temp sensor in its packaging so power is practically 100% as per dyno accuracy I want lev to give me a 100 percent answer that their is no restriction exhaust and then it will be back on dyno to flatten out afrs to 9000rpm for anyone else tuning car drops a lot of power when it goes richer then 11:1 especially up top and over 7500rpm its sitting on 10:1 lev has the water at max flow which is probably why it wants leaner mixtures rice had it set at a much lower flow setting the green rx3 is waiting for owner to finish the outside bits and pieces