Feeding the Turbo Rotary: Horsepower, Airflow, Fuels
#77
Senior Member
iTrader: (17)
Yes, very informative stats there.
I have a 76mm ball bearing turbo with .84 a/r hot side running e85.
Sump pan on the gas tank supplies e85 fuel through a 10an braided hose to a 100micron filter. The e85 that goes through the filter and into my Aeromotive A1000 fuel pump which gets forced through 6an braided fuel lines and sprayed through 1000cc primaries and 1200cc secondaries.
But here is the question. What should the psi of my fuel be at (Aeromotive FPR)? I currently have it at 38psi, should I run a higher psi .ike 45-50psi?
I have a 76mm ball bearing turbo with .84 a/r hot side running e85.
Sump pan on the gas tank supplies e85 fuel through a 10an braided hose to a 100micron filter. The e85 that goes through the filter and into my Aeromotive A1000 fuel pump which gets forced through 6an braided fuel lines and sprayed through 1000cc primaries and 1200cc secondaries.
But here is the question. What should the psi of my fuel be at (Aeromotive FPR)? I currently have it at 38psi, should I run a higher psi .ike 45-50psi?
Thread
Thread Starter
Forum
Replies
Last Post