I tried searching for information on installing the aquamist 2d system on an FD but I haven't had any luck .

I bought a second hand system and it came without a semblance of an instruction

so I'm kind of at a dead end with the exception of scouring google and finding that apparently those instructions seem to get lost alot .

so if anyone has first hand knowledge , or a link to the original instructions you would be saving my life..

and yes I did search .

ALSO in my search I read you could maybe connect the aquamist 2d onto my power FC for dataloging and who knows what else ?

if anyone wants to elaborate on that I'd be very grateful

 

www.howertonengineering.com

 

Well I got the wiring down ..

BUT the biggest thing is the tap..

Now Like I said I bought a used unit and the injector has a little bit of thread on it . and thats it .. my question is .. well.. where doesi t screw into/ I have a greddy elbow I'm using should I use the actual elbow and run a tap through it and have hte injector screw onto the actual elbow ? OR should that go all the way through and have some sort of a nut that holds it?

and should there be some sort of sealent ? and

what size bit / tap should I use? sorry for all these stupid questions

 

i posted in the aquamist forum for u. G

 

Thank you I will look it up as soon as I can