where should the knock settings be set for the fd.

i believe i saw the threshold set around 1.1v?

 

You need to log "Knock RAW" and "Engine speed". You will make a new knock sensor cal table based on the data you collect. I believe 1.1v is too high. You may only be 0.7v at the upper end of the threshold.

EB Turbo

 

what about 0.3 or 0.4 im reading that peak at 6800 rpms
quite strange cause it doesn't change no matter the Ign timing

 

Logs?

EB Turbo

 

Ok,
I will do other log later , cause i need to work a little bit on the fuel map.
But as an Ex for the knock sensor.

 

ok i made another log today

 

Well acording my logs im reading max 0.45v