|
knock settings
where should the knock settings be set for the fd.
i believe i saw the threshold set around 1.1v? |
You need to log "Knock RAW" and "Engine speed". You will make a new knock sensor cal table based on the data you collect. I believe 1.1v is too high. You may only be 0.7v at the upper end of the threshold.
EB Turbo |
what about 0.3 or 0.4 im reading that peak at 6800 rpms
quite strange cause it doesn't change no matter the Ign timing |
Originally Posted by rexset
(Post 11608463)
what about 0.3 or 0.4 im reading that peak at 6800 rpms
quite strange cause it doesn't change no matter the Ign timing EB Turbo |
1 Attachment(s)
Ok,
I will do other log later , cause i need to work a little bit on the fuel map. But as an Ex for the knock sensor. |
1 Attachment(s)
ok i made another log today
|
Well acording my logs im reading max 0.45v
|
| All times are GMT -5. The time now is 12:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands