as title says, which resistor is best to use with the bosch 1680 injector running the aem unit.

 

I would prefer a driver (AEM P&H driver, FJO, etc) over a resistor any day. I also had success using a honda resistor box albeit not on an RX7.

 

I am using a Mitsubishi 4cyl resistor pack, but there are others available. I know Rotary Aviation had some they were selling that supposedly were very good.

 

hey d walker, I know the fjo unit is pretty good price but a little more info on your setup of the mitsubishi injector driver would be interesting to see.

or which mitsubishi unit exactly?
and what is your setup?

 

More than likely the one out of an eclipse. Just as simple as the honda one with a different look lol

 

Do you have to use a resistor with the Aem ems? Do the only run LI injectors not a fan of using any resistors...

 

how can you connect it
for the price seem to be the best deal

Take a look of this

http://www.ebay.com/itm/Mitsubishi-Eclipse-Gst-Gsx-2g-Fuel-Injector-Resistor-Pack-Talon-Tsi-95-99-4g63-/121065817535?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AMitsubishi&hash=item1c3015c5bf&vxp=mtr

 

?

 

You can either hardwire the resistor pack into the engine harness or you can make a PnP adapter for it. The easiest place to get access to the Injector wires is at the ECU.

EB Turbo

 

So its the same that the aem inj driver?

 

It does the same thing but the AEM uses a different connector.

EB Turbo

 

How can i get the pinout?

Witch one you recomend to buy?

 

what do you think about this?
http://www.ebay.com/itm/BOSCH-160LB-1700CC-160-LB-FUEL-INJECTOR-HIGH-IMPEDANCE-EV1-CONNECTOR-W-HARNESS-/290883472206?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item43ba018b4e
I have a cuple of 1680cc bosch low impedance fuel injectors but they are leaking , so can i buy this ones and no use the resistors?

 

Yes, those will work. You should get battery offset tables with the injectors and you can input that data directly into the ECU.

EB Turbo

 

Excelent!!
Thanks Mate!!!!

I will
But firts i need to deal with the wastegate problem
Hope that i will solve that this weekend or next week

 

Wastegate problem fixed
I went with a single Tial V60 , is the best!!!!
Now i check my injectors and they are damage so i need to buy a couple new
The best will be the same ohm that the original
Im thinking about the 2000cc ones or 1700cc

 

How much power are you planning on making?

EB Turbo

 

400 whp~430whp
Now im running 4 850cc with an Nipon denso supra fuel pump

 

The 850s are stock secondary injectors?

EB Turbo

 

Yes
They are