3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

WTF is this?

Thread Tools
 
Search this Thread
 
Old Oct 2, 2005 | 06:29 PM
  #1  
mibad's Avatar
Thread Starter
It Just Feels Right
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 720
Likes: 2
From: Southern Maryland
WTF is this?

I was looking for a small coolant leak and I found this. It looks like a tube that a vac line would connect to. It's covered with the blue tape that all the engine openings were covered with when I bought the engine. I installed the reman this past June. Engine runs well, but I apparently I missed something! It's below the throttle body on the drivers side. You can see it's just above the 13B engraved on the engine.
Attached Thumbnails WTF is this?-dunno.jpg  
Reply
Old Oct 2, 2005 | 06:40 PM
  #2  
FDNewbie's Avatar
Sponsor
Tenured Member: 20 Years
iTrader: (10)
 
Joined: Jul 2003
Posts: 13,216
Likes: 4
From: Tampa, FL
AWS?
Reply
Old Oct 2, 2005 | 06:42 PM
  #3  
potatochobit's Avatar
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (1)
 
Joined: May 2003
Posts: 1,464
Likes: 0
From: Dallas
under the throttle body? i was gona say its an old packet of grease someone left in the engine lOL

but could be the coolant link or other unused solenoid. i dont remember sorry :/
Reply
Old Oct 2, 2005 | 07:19 PM
  #4  
tphan's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: May 2004
Posts: 886
Likes: 1
From: Dallas, Texas
Smile

smoke it
Reply
Old Oct 2, 2005 | 07:53 PM
  #5  
DaleClark's Avatar
RX-7 Bad Ass
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (56)
 
Joined: Jan 2002
Posts: 15,622
Likes: 2,725
From: Pensacola, FL
I believe that's for the PCV system. Get out your vacuum diagram and have a look. I think that's the nipple on the center iron, just below the oil fill neck pedastal.

If it's not hooked to something, you can get some seepy oil mess from that hole. Stock the PCV system vents to the intake.

Dale
Reply
Old Oct 2, 2005 | 07:56 PM
  #6  
mibad's Avatar
Thread Starter
It Just Feels Right
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 720
Likes: 2
From: Southern Maryland
I'll check it out. Thanks.
Reply
Old Oct 2, 2005 | 08:03 PM
  #7  
potatochobit's Avatar
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (1)
 
Joined: May 2003
Posts: 1,464
Likes: 0
From: Dallas
if it is the PCV put it back together! thats not a mod i would recommend.
Reply
Old Oct 2, 2005 | 08:54 PM
  #8  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
dale is right. not a problem as long as the nipple off the plastic fill neck sees vac only
Reply
Old Oct 3, 2005 | 08:18 PM
  #9  
mibad's Avatar
Thread Starter
It Just Feels Right
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 720
Likes: 2
From: Southern Maryland
I guess what's confusing me is I can't find it in pics of the old engine, yet it appears to have come as part of the reman.
Attached Thumbnails WTF is this?-oldengine.jpg  
Reply
Old Oct 3, 2005 | 09:05 PM
  #10  
poss's Avatar
Slower Traffic Keep Right
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Apr 2002
Posts: 2,194
Likes: 2
From: Dayton, OH
Those that came from the factory with it had a cap on the nipple.

They apparently had it up to VIN#2401 in 93 then deleted it afterwards. It's on page 1-E3 of the 93 parts fische if you want to investigate.
Reply
Old Oct 4, 2005 | 10:54 AM
  #11  
mibad's Avatar
Thread Starter
It Just Feels Right
Tenured Member 05 Years
 
Joined: Apr 2005
Posts: 720
Likes: 2
From: Southern Maryland
Originally Posted by poss
Those that came from the factory with it had a cap on the nipple.

They apparently had it up to VIN#2401 in 93 then deleted it afterwards. It's on page 1-E3 of the 93 parts fische if you want to investigate.

Wow. You guys know Way too much stuff about this car, but I'm glad!
Thanks to all. I'm capping that rascal off.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
EfiniGirl
Haltech Forum
2
Sep 1, 2015 09:31 PM
Wolf_
Single Turbo RX-7's
3
Aug 11, 2015 04:23 PM
Ryde _Or_Die
2nd Generation Specific (1986-1992)
3
Oct 30, 2001 01:48 AM




All times are GMT -5. The time now is 07:34 AM.