I'm sure someone here has had to do this before. Before splicing my wires and harness, I was wondering if anyone who has done this before has any tips on how to make this process a little easier.

I know that JT-imports sells the adapter if you buy the lights from them. Anyone in the US sell it?

Thanks

 

I think JT sells it seperate, as i remember its in the Border stuff, 65 bucks for a pair. Probably anyone that deals in border could get it.

 

thanks BMike.

I wanted to see if there was a way to do it without buying the harness.

 

Yea, dont waste the money on a harness. Cut the original off and there is a Red, Green and Black wire. The Green/black goes to the turn signal and the red/black goes to the driving lights. You will need to add another ground because there is only one ground for the stock lights.

Jason

 

I just cut a female crimp so that it would connect securely, then after getting them all connected I filled it with hot glue so it wouldn't wiggle loose, I haven't had any problems yet.

 

Hey, thanks Jason. Great product. Looks real nice. Thanks for the tip.