boostedyellow7

for 3 wire 02 how do i hook it up what color wire's go where. black to what 2 white'sto what?

jr

Black is the sensor wire, that goes to the ECU, just splice it into the wire that goes to the stock O2 connector. The 2 white wires are to power the heating element. There is no polarity to worry about here, it wires up like a light bulb, just find a good power source. I've heard people tap into the power for the wiper motor.

boostedyellow7

thanks just put the whites too the same power sorce right thanks alot.

Turbo_F1

Why would you go with the 3 wire harness anyway? What advantage is there?

weaklink

Hey JR,

what's up with your site, it is a blank page?

jr

The 3 wire O2 sensor is a heated sensor. Do a search on heated O2's to see what people say about it's benefits since there have been many debates on them in the past. I believe that the 2 main benefits are the ability to safely (for the O2 sensor) run leaded fuel, and that you will get more accurate results sooner since the O2 needs to be heated up before it begins to work properly.

You must have caught it while I was FTP'ing some info up, check it again now.

black99

http://www.rx7turboturbo.com/robrobinette/o2_sensor.htm