will the transmission in a Turbo II bolt up to a 93+ rx7 motor
12-09-01, 12:11 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2001
Location: Vancouver Island
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
will the transmission in a Turbo II bolt up to a 93+ rx7 motor
just wanted to know if the two transmissions are the same with the 93+ and the 87-92 turbo II or are they the same as the N/A 87-92 RX-7
12-09-01, 03:59 PM
#3
20B N/A Wide Body FC3S
The input shaft spine count/diam is the same, but it is shorter on the FC by about 2" so you will have to swap it out with an FD one, you will also have to put on the FD bell housing and swap the tail shaft case out, the sift linkage and every thing else is pretty much identical.
12-09-01, 05:51 PM
#4
Full Member
Join Date: Dec 2001
Location: New York
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
The input shaft spine count/diam is the same, but it is shorter on the FC by about 2" so you will have to swap it out with an FD one, you will also have to put on the FD bell housing and swap the tail shaft case out, the sift linkage and every thing else is pretty much identical.
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
