hey everyone,

this is my first time setting up a fuel system in a 13b so here goes.

i bought a full used fuel kit a while back and i've had it sitting so i've pretty much forgotten what the specs are on them

I think i need those spacer adapters to fit the bungs on the LIM and o-ring kit

does anyone know where i can get them

and does anyone know off hand what size these injectors are?

oh and obviously they will be flow tested and cleaned up before they go in

any help on where i can get the adapter spacers and the o-rings?

thanks

here are the pics of the injectors:

 

http://www.cj-motorsports.com/catrx7injadp.htm

 

oh and no worries on the rust spots thats my fault not the previous owner...i didnt store them properly but the clean up should be quick on the rust ...i have a sandblasting machine at the shop, so i'll clean em up and repaint em before they go to get flow tested and cleaned

 

sweet thanks

does this place also have the o-rings for the top of the injector where it goes into the rail?

 

I don't think so, but you would have to give them a call.

 

+1 for those adapters from CJ Motorsports. I have a set and love em. They may be able to ID those injectors for you if you ask.

Most anywhere that will recommend an oring will want to know what size/brand injector it is. Your best bet is to take them into a local speed shop that carries orings and see if you can find some that fit correctly.

 

EDIT: disregard, I didn't look at the pic closely enough

 

I like kgparts.com and their injector rehab. Very easy to contact and always willing to help. I messed up when installing my spacers and they sent me another set for free.

 

That is an EV1 style injector.

 

what does that mean? lol sorry for my injector ignorance

it says that you are located in florida, do you guys have the proper top o-rings for this?

thanks,
VJ

 

google EV1 connector bro

 

Stop wasting money on rusted injectors and get the vacuum lines so we can do the simple sequential already

 

I believe that is actually a Bosch injector. Denso did make that a style injector for a short amount of time. Seems as though the part numbers have been covered up.

We do have the proper o-rings for that injector.

I would recommend sending them to a reputable fuel injector cleaning facility and having them flow tested, cleaned and matched to assure that you have a good working matched set of injectors.