wild boost problem
10-10-02, 10:49 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2002
Location: USA
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
wild boost problem
I am trying to figure out how to control the boost using the stock FD wastegate. I have no cats a full exhaust, emanage fuel controler and greddy intakeand the turbos have been converted to non sequentail I have no boost silaniods.
there are two nipples sticking out of the wastegate which one goes to what???
there are two nipples sticking out of the wastegate which one goes to what???
10-10-02, 11:14 PM
#2
Chances are that if you have a dp, mp and something that flow better than the stock catback, you are over-running the stock wastegate.
You'll probably either need to port it or add some restrictor plates to the exhaust.
You might get some good info from this thread:
https://www.rx7club.com/forum/showth...threadid=26389
You'll probably either need to port it or add some restrictor plates to the exhaust.
You might get some good info from this thread:
https://www.rx7club.com/forum/showth...threadid=26389
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM